We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white rectangular tankless water heater, 10.75 by 5.25 by 3 inches, undersink form factor

Eemax

Eemax SPEX60T Electric Tankless Water Heater 277V Single Phase 6000W

SKU CH-W71E-P29CS

Compact undersink electric tankless heater delivers 0.2–3 gpm at 277 V single-phase, drawing 22 A for 6 kW output with adjustable 70–140 °F temperature

  • TypeWater Heaters
  • Instant hot water on demand with 0.2 gpm activation
  • Delivers up to 140 °F for sanitising tasks
  • Compact 10.75 × 5.25 in footprint fits under sinks
  • Runs on standard 277 V single-phase supply at 22 A
  • 6000 W heating element provides 3 gpm maximum flow

Undersink Electric Tankless Heater

The Eemax SPEX60T is an undersink electric tankless water heater designed for indoor commercial and residential use. It operates on a 277V AC single-phase supply and delivers hot water on demand without a storage tank. The unit activates at a minimum flow of 0.2 gpm.

Flow Rate and Temperature Range

Maximum flow rate reaches 3 gpm with a cold inlet size of 3/8 in. Delivered temperature is adjustable between 70 and 140 degrees F. These limits define the practical output for point-of-use applications such as handwashing or low-volume fixtures.

6000 Watt Power Requirement

The heater draws 6,000 W at 22 A on a dedicated 277V circuit. This single specification determines whether the electrical service can support the unit. Buyers without 277V single-phase power cannot install this model.

Highlights

  • Instant hot water on demand with 0.2 gpm activation
  • Delivers up to 140 °F for sanitising tasks
  • Compact 10.75 × 5.25 in footprint fits under sinks
  • Runs on standard 277 V single-phase supply at 22 A
  • 6000 W heating element provides 3 gpm maximum flow

Specifications

BrandEEMAX
TypeWater Heaters

Questions about this item

Should I pick the 6,000 W model or a lower-wattage unit for my undersink installation?

The 6,000 W unit draws 22 A at 277 V and delivers up to 3 gpm, so it suits fixtures that need continuous hot water without storage.

What outlet temperature will I actually get at the tap?

The heater can raise water to 140 °F and will not go below 70 °F, giving a usable range for hand-washing and light kitchen tasks.

Does the 277 V single-phase supply limit the flow I can achieve?

At 277 V single phase the element is capped at 6,000 W, which supports a maximum flow of 3 gpm and activates at 0.2 gpm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.