Eemax
Eemax SPEX55 electric tankless water heater 5.5 kW 240 V single phase undersink
Compact 5.5 kW electric tankless unit delivers up to 2 gpm at 240 V for undersink kitchen or lavatory use
- TypeWater Heaters
- Compact 10.75 in height fits tight undersink spaces
- 5 kW heating delivers 140 °F maximum outlet temperature
- 5 gpm activation starts flow with minimal water demand
- 2 gpm peak rate serves kitchen and lavatory fixtures
- 240 V single-phase 23 A design suits standard commercial wiring
Eemax SPEX55 Undersink Heater
The Eemax SPEX55 is a single-phase electric tankless water heater designed for undersink installation. It operates at 240V AC and delivers a maximum flow rate of 2 gpm with a minimum activation of .5 gpm. The unit suits commercial indoor applications such as kitchen sinks, lavatory faucets, metering faucets and sensor faucets.
Replaces Storage Tank Units
This heater replaces traditional storage tanks where space is limited and on-demand hot water is preferred. The jump is worth it when you need continuous delivery between 70 and 140 Degrees F without standby losses. It draws 23 A at 5,500 W, so the electrical supply must support that load.
Compression Inlet Installation
Installation uses a 3/8 in compression cold inlet fitting suited to standard undersink plumbing. The compact frame measures 10.75 in high, 5.25 in wide and 3 in deep. What usually goes wrong is insufficient circuit capacity or incorrect wire gauge for the 23 A draw, which prevents the unit from reaching its rated temperature.
Highlights
- Compact 10.75 in height fits tight undersink spaces
- 5 kW heating delivers 140 °F maximum outlet temperature
- 5 gpm activation starts flow with minimal water demand
- 2 gpm peak rate serves kitchen and lavatory fixtures
- 240 V single-phase 23 A design suits standard commercial wiring
Specifications
| Brand | EEMAX |
|---|---|
| Type | Water Heaters |
Questions about this item
Will the 10.75 in height and 5.25 in width fit under my kitchen sink cabinet?
The unit measures 10.75 in tall, 5.25 in wide and 3 in deep, so it fits in most standard undersink cabinets.
What electrical supply and cold-water connection are required for the 5.5 kW 240 V single-phase heater?
It needs a dedicated 240 V single-phase circuit rated for 23 A and a 3/8 in compression cold-water inlet.
How often should I descale the heating elements given the 0.5 gpm minimum activation flow?
Descale the elements annually or whenever flow drops below 0.5 gpm, depending on local water hardness.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



