EDUP
EDUP Starlink PoE Injector Adapter Kit V2 RJ45 T568B 10/100/1000 Mbps -20 to +55 °C Black EP-RT9605
Connects a Starlink V2 dish to a PoE injector using RJ45 T568B wiring at up to 1000 Mb/s and operates from -20 to +55 °C
- Reliable gigabit speeds up to 1000 Mb/s via T568B wiring
- Operates from -20 °C to +55 °C in harsh climates
- Humidity tolerance 10 % to 90 % non-condensing
- Survives storage extremes from -40 °C to +70 °C
- Powers Starlink V2 dish through PoE injector for simple setup
Starlink V2 PoE Adapter Kit
This adapter kit connects a Starlink Satellite Dish V2 to a Power over Ethernet injector using RJ45 connectors wired to the T568B standard. It is intended for installers or home users who need a wired Ethernet link from the dish to their network equipment. The kit provides the physical interface required for both data and power delivery over a single cable run.
Operating Range -20 to +55 °C
The unit operates reliably across a temperature span of -20 to +55 °C and tolerates humidity from 10% to 90% non-condensing. Storage limits extend from -40 to +70 °C for long-term durability. As a passive PoE injector adapter, it adds no active cooling or power draw of its own, leaving thermal load and noise entirely dependent on the connected injector and network switch.
Black Housing with Gigabit RJ45 Ports
The black enclosure houses RJ45 ports rated for 10/100/1000 Mb/s Ethernet throughput. T568B pinout ensures compatibility with standard Category 5e or better cabling. No mounting hardware or additional connectors are included, so installers must provide their own cable management and strain relief for outdoor or indoor routing.
Highlights
- Reliable gigabit speeds up to 1000 Mb/s via T568B wiring
- Operates from -20 °C to +55 °C in harsh climates
- Humidity tolerance 10 % to 90 % non-condensing
- Survives storage extremes from -40 °C to +70 °C
- Powers Starlink V2 dish through PoE injector for simple setup
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the EP-RT9605 kit and which wiring step is often missed?
Connect the Starlink Dishy cable RJ45 plug into the injector port using the T568B pinout, then link the injector LAN port to your router; the step often missed is confirming both ends follow T568B rather than T568A.
What maintenance or replacement will the EP-RT9605 need over time?
Inspect RJ45 contacts for corrosion and reseat cables annually; the injector itself has no moving parts, so only the Ethernet patch cords typically require replacement if damaged.
Which limit appears first on the EP-RT9605 during sustained heavy traffic?
The 1000 Mbps Ethernet link saturates before the injector reaches its 55 °C operating ceiling, so throughput caps at the port speed under continuous load.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114821BTC
In stock
