We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal axial fan 142mm square frame seven blades ball bearing 230V 27W IP22

Ebm-Papst

Ebm-Papst W2E142-BB01-01 230V 27W 142mm axial case fan

SKU CH-ADRJ-51BCG

A 142 mm metal axial fan runs on 230 VAC, draws 27 W at 2800 rpm, and uses a ball bearing for continuous cooling

  • TypeAXIAL COOLING FAN
  • All-metal housing and impeller withstand -25 °C to 65 °C operation
  • Ball-bearing motor runs at 2800 rpm on 50 Hz and 3350 rpm on 60 Hz
  • 230 VAC input draws only 0.12 A at 27 W
  • IP22 rating and CE-marked to EN 60335-1 for industrial safety
  • Compact 142 mm frame fits any mounting orientation

Ebm-Papst W2E142-BB01-01 230 V AC axial fan

The Ebm-Papst W2E142-BB01-01 is a 142 mm all-metal axial fan designed for 230 V AC mains operation. It uses a shaded-pole motor with ball bearings and a painted sheet-steel impeller inside a die-cast aluminium housing. The unit draws 0.12 A at 50 Hz and 0.13 A at 60 Hz, consuming 27 W to 28 W while turning at 2800 rpm to 3350 rpm. It is rated IP22 and operates from -25 °C to 65 °C.

Industrial and specialist cooling only

This fan suits engineers who need a mains-voltage axial unit with metal construction for equipment enclosures, industrial cabinets or high-temperature environments where a 230 V AC supply is available. It is not for PC builders who require a low-voltage PWM fan with a standard frame and motherboard header control. It is also not for anyone needing a centrifugal blower or a variable-speed EC motor.

230 V AC nominal voltage

The single specification that decides fit is the 230 V AC nominal voltage at 50/60 Hz. The fan connects directly to mains power through a 1 µF, 400 VDB capacitor and has no PWM, voltage-regulation or motherboard header interface. Verify that your application provides this exact supply and mounting clearance before ordering.

Highlights

  • All-metal housing and impeller withstand -25 °C to 65 °C operation
  • Ball-bearing motor runs at 2800 rpm on 50 Hz and 3350 rpm on 60 Hz
  • 230 VAC input draws only 0.12 A at 27 W
  • IP22 rating and CE-marked to EN 60335-1 for industrial safety
  • Compact 142 mm frame fits any mounting orientation

Specifications

BrandEbmpapst
ModelW2E142-BB01-01
TypeAXIAL COOLING FAN

Questions about this item

What mains supply do I need to run this 230 VAC 50/60 Hz axial fan?

The fan is rated for 230 VAC at 50 or 60 Hz and draws 0.12 A at 50 Hz or 0.13 A at 60 Hz, so a standard European mains circuit is sufficient.

Will the 27 W at 50 Hz or 28 W at 60 Hz power draw overload a legacy fan header rated for lower wattage?

This unit runs directly from mains voltage, not from a motherboard header, so it does not load a PWM or voltage-controlled fan connector at all.

How can I confirm the fan is operating correctly after wiring it with its 1 µF 400 VDB capacitor?

At 50 Hz the motor should spin at 2800 rpm and at 60 Hz at 3350 rpm; measuring line current near 0.12 A or 0.13 A respectively confirms normal operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.