Eaton
Eaton NGR25881BNAAN lighted rocker switch LED 3-position DPDT 10A 250V IP42
Lighted DPDT rocker switch with 14V LED indicator, momentary on/off/on action, 10A at 250V AC, 15A at 125V AC or 28V DC, IP42 rated, .250in quick-connect tabs
- Three-position DPDT switching for versatile circuit control
- LED indicator at 14 V DC shows status at a glance
- 10 A at 250 V AC rating handles demanding loads
- IP42 enclosure resists dust and dripping water
- 250 in quick-connect tabs speed up installation
Eaton NGR25881BNAAN Lighted Rocker Switch
The Eaton NGR25881BNAAN is a lighted rocker switch with an LED indicator and a 3-position DPDT contact form. It offers momentary on/off/momentary on switching and a 14V DC incandescent indicator light for clear status visibility. Rated for 10 A at 250 V AC and 15 A at 125 V AC, it also handles 15 A at 28 V DC. The unit carries CSA, RoHS and UL Listed approvals with an IP42 rating.
Suits panels needing illuminated three-position
This switch suits control panels that require illuminated three-position momentary action with DPDT contacts. The quick-connect tabs simplify wiring in automotive, marine or industrial machinery. Buyers who need a maintained on/off/on action, a non-illuminated actuator or a higher IP rating such as IP67 should look at other switch types. It is not for applications demanding sealed submersion protection.
Verify mounting hole and terminal spacing before
Before ordering, confirm your panel cut-out matches the 0.867 in by 1.734 in mounting hole dimensions. Ensure the 0.250 in quick-connect tabs are compatible with your wire terminals or connectors. Check that the 10 A at 250 V AC and 15 A at 28 V DC ratings meet your circuit requirements. The IP42 rating means the switch is protected against solid objects over 1 mm and dripping water only.
Highlights
- Three-position DPDT switching for versatile circuit control
- LED indicator at 14 V DC shows status at a glance
- 10 A at 250 V AC rating handles demanding loads
- IP42 enclosure resists dust and dripping water
- 250 in quick-connect tabs speed up installation
Specifications
| Brand | EATON |
|---|
Questions about this item
What panel cut-out do I need for the 0.867 in x 1.734 in mounting hole?
Cut a rectangular opening of 0.867 in by 1.734 in in the panel; the switch body then snaps or screws into that cut-out.
Can the 14 V DC incandescent indicator run directly from a 12 V vehicle system?
Yes, the indicator is rated for 14 V DC and will operate on a typical 12 V automotive supply.
How do I confirm the momentary on/off/momentary on action is working?
Press the rocker to each end — the LED should illuminate in both momentary positions and go dark when released to the centre off position.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
