Eaton
Eaton NGR15061BNAAN SPST Lighted Rocker Switch 10A 250V AC 15A 28V DC IP42 14V Indicator
SPST lighted rocker switch rated 10A at 250V AC and 15A at 28V DC with a 14V incandescent indicator and IP42 protection
- SPST off/on function simplifies power control
- 10 A at 250 V AC rating handles mains circuits
- 15 A at 28 V DC rating suits vehicle systems
- 14 V incandescent indicator shows status clearly
- IP42 rating protects against dust and splashes
SPST Lighted Rocker Switch for 14 V Indicator Panels
This Eaton NGR15061BNAAN switch is a single-pole single-throw rocker with a built-in 14 V DC incandescent indicator. It suits automotive, marine or industrial panels that need a maintained off/on function and a visible status light. The 0.250 in quick-connect tabs allow fast wiring without soldering.
Current and Voltage Limits for AC and DC Loads
The contacts are rated for 10 A at 250 V AC and 15 A at 125 V AC, while the DC rating is 15 A at 28 V. IP42 protection guards against solid objects over 1 mm and dripping water, so the switch is not suited for direct spray or immersion. CSA, RoHS and UL listings confirm compliance with recognised safety standards.
Panel Cut-Out and Wiring Checks Before Ordering
Verify that your panel can accommodate a mounting hole of 0.867 in by 1.734 in. Ensure the circuit voltage does not exceed the AC or DC ratings above and that the indicator voltage matches your 14 V DC supply. The six quick-connect terminals require matching 0.250 in female connectors for a secure fit.
Highlights
- SPST off/on function simplifies power control
- 10 A at 250 V AC rating handles mains circuits
- 15 A at 28 V DC rating suits vehicle systems
- 14 V incandescent indicator shows status clearly
- IP42 rating protects against dust and splashes
Specifications
| Brand | EATON |
|---|
Questions about this item
Which terminal style should I select for my wiring harness?
The switch uses 0.250 in quick-connect tabs, so choose crimp terminals or connectors sized for that tab width.
How much current can this switch handle on a 12 V vehicle circuit?
It is rated 15 A at 28 V DC, which covers typical 12 V automotive loads up to that current.
What does the IP42 rating protect against in a dashboard install?
IP42 guards against solid objects over 1 mm and vertically dripping water, suitable for interior panels with occasional moisture.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
