Eaton
Eaton EMPDT1H1C2 Environmental Monitoring Probe accessory
Monitors temperature, humidity and two dry-contact points in rack enclosures, requires a NETWORK-M2 card and supports up to three daisy-chained probes
- TypeOther
- Compatibility10/100Mb ConectUPS-X, ConnectUPS-BD and ConnectUPS-E with RW
- FeaturesThe optional Eaton Environmental Monitoring Probe (EMP) Gen
- Dimensions1.15" x 1.48" x 2.26"
- Weight1.19 oz.
- Monitors temperature and humidity in rack enclosures
- Tracks two dry-contact status inputs for alarm conditions
- Connects to NETWORK-M2 card for remote data access
- Up to three probes daisy-chain on one card
- Compact 1.15" x 1.48" x 2.26" form factor fits tight spaces
Product identity
The Eaton EMPDT1H1C2 is a Generation 2 Environmental Monitoring Probe that measures temperature, humidity and two dry-contact status points. It is designed for IT managers who need remote visibility of rack conditions through a compatible Network-M2 card.
Compatibility check
Verify that your UPS or connectivity card is a 10/100Mb ConectUPS-X, ConnectUPS-BD or ConnectUPS-E running firmware RW V3.01 or higher and that a Network-M2 card is installed. The older EMP001 probe will not work with this generation.
Accessory impact
Up to three Gen 2 probes can be daisy-chained on a single Network-M2 card, expanding coverage without additional network ports. The compact 1.15 x 1.48 x 2.26 inch form factor and 1.19 oz weight allow placement in tight rack spaces.
Highlights
- Monitors temperature and humidity in rack enclosures
- Tracks two dry-contact status inputs for alarm conditions
- Connects to NETWORK-M2 card for remote data access
- Up to three probes daisy-chain on one card
- Compact 1.15" x 1.48" x 2.26" form factor fits tight spaces
Specifications
| Brand | EATON |
|---|---|
| Model | EMPDT1H1C2 |
| Type | Other |
| Compatibility | 10/100Mb ConectUPS-X, ConnectUPS-BD and ConnectUPS-E with RW V3.01 and higher Note: The EMPDT1H1 probe is only compatible with the Network-M2 card; the existing EMP001 probe is not compatible with the new Network-M2 card. |
| Features | The optional Eaton Environmental Monitoring Probe (EMP) Gen 2 is a connectivity device that enables you to collect temperature and humidity readings in rack enclosures and monitor environmental data remotely using Eaton's power monitoring solutions or a standard web browser. Each EMP provides one temperature, one humidity, and two dry-contact status data points. Compatible with UPSs and PDUs, the EMP Gen 2 features a translucent case and integrated LED to positively identify the status of each sensor at a glance while walking the aisles. |
| Dimensions | 1.15" x 1.48" x 2.26" |
| Weight | 1.19 oz. |
| Shipping weight | 0.45 kg |
| Package size | 150 × 115 × 40 mm |
Questions about this item
What comes in the box with the EMPDT1H1C2 and do I need to buy a Network-M2 card separately?
The probe is supplied as a single unit; a compatible NETWORK-M2 card is required and is not included.
Which probe version should I choose if I already have an older EMP001 probe?
The EMPDT1H1C2 is the Generation 2 probe and works only with the NETWORK-M2 card; the EMP001 is not compatible with that card.
What do the temperature and humidity readings actually tell me once the probe is installed in a rack?
The device reports real-time temperature and humidity values plus two dry-contact status points, allowing remote monitoring of rack conditions.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114323BTC
In stock
