We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U horizontal rack PDU with nine IEC outlets and dual L6-20P inputs

Eaton

Eaton EATS220 1U Horizontal PDU 9 Outlets 3.33 kVA 120/230V

SKU CH-CGZJ-SVGRV MPN EATS220

A 1U horizontal PDU with automatic transfer switching between two 120/230 V sources, delivering 3.33 kVA through eight C13 and one C19 outlets

  • TypeOthers
  • Input Voltage120 V 230 V
  • FeaturesOutput Receptacles:1 x IEC 320-C19 8 x IEC 320-C13 Power Rat
  • Weight7.80 lb
  • 1U horizontal rackmount fits standard cabinets
  • Automatic transfer switch protects critical loads during power source failure
  • Dual input feeds (2×L6-20P, 2×IEC-320-C20) provide source redundancy
  • Nine IEC outlets (8×C13, 1×C19) support diverse equipment
  • 33 kVA rating at 120/230 V delivers ample capacity

1U Horizontal eATS PDU

The Eaton EATS220 is a 1U horizontal power distribution unit with an integrated automatic transfer switch. It accepts two independent AC sources and switches between them without interrupting connected equipment. The unit delivers 3.33 kVA through nine locking IEC outlets. It is built for rack environments that cannot tolerate a power loss on the primary feed.

Dual L6-20P and C20 inputs

Two NEMA L6-20P plugs and two IEC 320-C20 inlets provide redundant input paths from separate circuits or UPS units. The internal transfer logic monitors both sources and moves the load to the secondary input within milliseconds when the primary deviates. This replaces single-cord PDUs or manual transfer panels where downtime during source failure is unacceptable.

Eight C13 and one C19 outputs

Eight IEC 320-C13 receptacles and one IEC 320-C19 receptacle distribute power to servers, switches and storage arrays. The 3.33 kVA rating supports dense 120 V or 230 V loads up to the rated apparent power. The single C19 outlet limits the number of high-draw devices that can be connected directly without adapter cables.

Highlights

  • 1U horizontal rackmount fits standard cabinets
  • Automatic transfer switch protects critical loads during power source failure
  • Dual input feeds (2×L6-20P, 2×IEC-320-C20) provide source redundancy
  • Nine IEC outlets (8×C13, 1×C19) support diverse equipment
  • 33 kVA rating at 120/230 V delivers ample capacity

Specifications

BrandEaton
TypeOthers
Input Voltage120 V
230 V
FeaturesOutput Receptacles:1 x IEC 320-C19
8 x IEC 320-C13
Power Rating:3.33 kVA
Form Factor:Horizontal Rackmount
Product Type:PDU
Power Rating:3.33 kVA
Form Factor:Horizontal Rackmount
Input Receptacles:2 x NEMA L6-20P
Product Name:eATS 9-Outlet PDU
Weight7.80 lb
Shipping weight5.58 kg
Package size579 × 381 × 137 mm

Questions about this item

Will the 1U horizontal form factor fit in a standard 19-inch rack?

Yes, the 1U horizontal design mounts in a standard 19-inch rack using the included brackets, occupying one rack unit of vertical space.

How do I connect the two input sources to the dual NEMA L6-20P and IEC-320-C20 plugs, and what is the common wiring mistake?

Connect each input cord to a separate, independent circuit; the common mistake is plugging both cords into the same circuit, which defeats the automatic transfer redundancy.

When should the internal transfer-switch mechanism be inspected or the unit replaced?

Eaton recommends a functional test of the automatic transfer switch annually; replace the unit if the self-test fails or after a major surge event.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.