We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray die-cast zinc push button enclosure, two 30 mm holes, 5.88 x 3.88 x 3.00 in

Eaton

Eaton E34N2-GR1 Push Button Enclosure 30mm 2-Hole Die Cast Zinc

SKU CH-W82J-V04RM

A 30 mm two-hole die-cast zinc enclosure rated NEMA 4, 4X, 12, 13 for surface-mounting E34 and 10250T push buttons

  • Protects controls in harsh environments with NEMA 4X rating
  • Fits standard 30 mm push buttons for easy integration
  • Die-cast zinc housing resists impact and corrosion
  • Surface-mount design simplifies installation on machinery
  • Certified to UL 505, CSA and CE standards

Push-button enclosure for E34 and 10250T units

The Eaton E34N2-GR1 is a die-cast zinc enclosure that accepts two 30 mm push buttons in a single column. It carries NEMA 4, 4X, 12 and 13 ratings plus CE, CSA, FDA 3-A and UL 505 compliance. Grey finish and surface-mount tabs suit industrial control panels.

Suits panels needing two operators in a compact

Builders who require more than two button positions or a different hole pattern should look at alternative enclosures. The 3/4 inch conduit entry and fixed dimensions limit wiring space for large cable bundles.

Two 30 mm holes in a single-column layout

This hole count and spacing determine whether the enclosure matches the intended operator arrangement. Verify the 5.88 by 3.88 inch footprint fits the available panel area before ordering.

Highlights

  • Protects controls in harsh environments with NEMA 4X rating
  • Fits standard 30 mm push buttons for easy integration
  • Die-cast zinc housing resists impact and corrosion
  • Surface-mount design simplifies installation on machinery
  • Certified to UL 505, CSA and CE standards

Specifications

BrandEATON

Questions about this item

How is the 30 mm hole pattern aligned when surface-mounting this die-cast zinc enclosure?

The enclosure measures 5.88 in high by 3.88 in wide with a 3.00 in depth; use the two 30 mm holes on 1-column centres and secure the box to a flat surface with the mounting lugs before wiring to avoid misalignment.

What ongoing maintenance does the NEMA 4X-rated die-cast zinc body require?

Inspect the gasket and 3/4 in conduit seal periodically for wear or corrosion; replace the gasket if compression set appears and re-torque cover screws to maintain the 4X rating.

At what point does the 3/4 in conduit entry become the limiting factor during sustained operation?

When cable fill approaches the conduit’s maximum permitted area, heat dissipation inside the 5.88 x 3.88 x 3.00 in cavity drops and the UL 505 temperature rating can be exceeded.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.