We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue industrial pin-and-sleeve plug with IP69K rating

Eaton

Eaton AH320C6W Straight Blade Plug 20A 250V Blue IP69K

SKU CH-JE7W-Q24S9

A pack of four 20 A, 250 V straight-blade plugs rated IP67 and IP69K for #12–#10 AWG cable

  • Voltage (Volts)250
  • Item Count4
  • Rated 20 A at 250 V for heavy-duty power delivery
  • IP69K and IP67 sealing resists high-pressure wash-down
  • Accepts 12 – 10 AWG conductors for secure wiring
  • Two-pole three-wire grounding ensures safe connection
  • Nickel-plated brass contacts in nylon housing withstand harsh environments

Eaton 20 A 250 V pin-and-sleeve plug

This Eaton straight-blade connector is rated 20 A at 250 V with a two-pole, three-wire grounding configuration. The blue nylon housing carries IP67 and IP69K ratings for wash-down environments. It accepts conductors from 12 AWG to 10 AWG and suits industrial or mobile equipment power feeds.

Nickel-plated brass contacts and back-wire terminals

Nickel-plated brass contacts resist corrosion in wet or chemical exposure. Back-wire terminals speed termination without screw torque. The cord-grip range spans 0.333 to 0.775 in, so a single device covers multiple cable diameters. Supplied as a case of four for crew kits or spares.

IP69K sealing and rugged nylon shell

The IP69K rating means the plug survives high-pressure, high-temperature wash-downs common in food processing and heavy equipment. Nylon housing withstands impact and UV exposure. Grounding pin orientation prevents mis-mating with non-grounded inlets.

Highlights

  • Rated 20 A at 250 V for heavy-duty power delivery
  • IP69K and IP67 sealing resists high-pressure wash-down
  • Accepts 12 – 10 AWG conductors for secure wiring
  • Two-pole three-wire grounding ensures safe connection
  • Nickel-plated brass contacts in nylon housing withstand harsh environments

Specifications

BrandEaton
Voltage (Volts)250
Item Count4

Questions about this item

How often will the nickel-plated brass contacts need inspection or replacement under heavy use?

Nickel-plated brass resists corrosion; inspect contacts during scheduled maintenance and replace if pitting or overheating appears.

What thermal limit appears first when the plug carries 20 A continuously?

The nylon housing and 250 V rating set the practical ceiling; sustained 20 A load will raise contact temperature before the IP69K seal degrades.

Does the IP69K rating change the plug’s heat dissipation or power loss during all-day operation?

IP69K seals against high-pressure washdown but does not alter resistive loss; expect normal I²R heating at 20 A with the #12–#10 AWG conductors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.