Eaton
Eaton 8004K26N1V2 rocker switch SPDT 10A 250V IP54
SPDT rocker switch rated 10 A at 250 V AC with IP54 sealing and 0.250 in quick-connect tabs
- SPDT on/on switching for dual-circuit control
- 10 A at 250 V AC rating handles substantial loads
- IP54 sealing resists dust and water splashes
- 250 in quick-connect tabs speed up wiring
- cRUus, UL E2702 and RoHS compliance verified
Eaton 8004K26N1V2 Rocker Switch
The Eaton 8004K26N1V2 is a new SPDT rocker switch rated for 10 A at 250 V AC and 15 A at 125 V AC. It features an On/On maintained function with three quick-connect terminals measuring 0.250 in. The switch mounts in a 0.867 in by 1.734 in cut-out and carries an IP54 rating for dust and splash protection.
Suits panel builders and maintenance engineers
This switch suits control panels and machinery requiring a maintained changeover action with a non-illuminated actuator. It is not for applications needing momentary contact, centre-off positions, or illuminated indication. Buyers who want a different terminal style, a higher IP rating, or a double-pole configuration should look at something else.
Handles 10 A resistive loads at 250 V AC
The contacts comfortably handle 10 A at 250 V AC, 15 A at 125 V AC, and 15 A at 28 V DC. The 3/4 hp motor rating provides headroom for small inductive loads. It runs out at currents above the listed ratings or in environments exceeding the IP54 ingress protection.
Highlights
- SPDT on/on switching for dual-circuit control
- 10 A at 250 V AC rating handles substantial loads
- IP54 sealing resists dust and water splashes
- 250 in quick-connect tabs speed up wiring
- cRUus, UL E2702 and RoHS compliance verified
Specifications
| Brand | EATON |
|---|
Questions about this item
What panel cut-out size must I already have for the 0.867 in x 1.734 in mounting hole?
The switch fits a rectangular cut-out of 0.867 in by 1.734 in; prepare that opening before installation.
Can I use the 0.250 in quick-connect tabs with existing crimp terminals?
Yes, the 0.250 in tabs accept standard quick-connect crimp terminals for 10 A 250 V AC or 15 A 125 V AC circuits.
How do I verify the IP54 seal is effective after wiring?
Apply rated voltage, operate the rocker through both On positions, then inspect the panel gasket for gaps and confirm no moisture ingress during a splash test.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
