Eaton
Eaton 8004K23N1V2 Rocker Switch SPST On/Off IP54
SPST rocker switch rated 10 A at 250 V AC with IP54 sealing and 0.250 in quick-connect tabs
- SPST On/Off switching for simple circuit control
- 10 A at 250 V AC rating handles moderate loads
- 15 A at 28 V DC rating supports low-voltage systems
- IP54 sealing protects against dust and water splashes
- 250 in quick-connect tabs enable fast wiring
Eaton 8004K23N1V2 Rocker Switch
This SPST rocker switch provides a simple on/off control for AC or DC circuits up to 10 A at 250 V AC, 15 A at 125 V AC or 15 A at 28 V DC. The 0.250 in quick-connect tabs allow fast wiring without soldering. An IP54 rating protects the contacts from dust and water splashes in industrial or mobile equipment.
Replaces worn toggle or push-button units
When an existing switch shows contact wear, corroded terminals or a cracked actuator, this model restores reliable switching with the same panel cut-out of 0.867 in by 1.734 in. The jump is worth it if the application needs the sealed IP54 construction that open-frame switches lack.
Handles motor loads up to 3/4 hp
The contacts carry 15 A at 125 V AC or 28 V DC continuously, giving headroom for small motor starting surges. At 250 V AC the rating drops to 10 A, so higher-voltage heating elements or loads beyond 3/4 hp exceed the safe operating area.
Highlights
- SPST On/Off switching for simple circuit control
- 10 A at 250 V AC rating handles moderate loads
- 15 A at 28 V DC rating supports low-voltage systems
- IP54 sealing protects against dust and water splashes
- 250 in quick-connect tabs enable fast wiring
Specifications
| Brand | EATON |
|---|
Questions about this item
What are the mounting hole dimensions for the 8004K23N1V2 rocker switch?
The switch requires a mounting cut-out of 0.867 in by 1.734 in.
How do I connect wires to the 0.250 in quick-connect tabs on this switch?
Crimp female quick-disconnect terminals onto the wires and push them firmly onto the two tabs; the common mistake is using solder or screw terminals instead.
When should I replace this IP54-rated switch?
Replace it if the rocker feels loose, the on/off action becomes intermittent, or the sealing degrades and lets moisture or dust past the IP54 rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
