Eaton
Eaton 8004K20N1V2 rocker switch On/Off/On 1/4 in tab
A maintained On/Off/On rocker switch with 0.250 in quick-connect tabs, rated 10 A at 250 V AC and 15 A at 28 V DC, in an IP54 black housing
- SPDT contact form enables three-way circuit control
- On/Off/On switching provides two active positions with centre off
- 10 A at 250 V AC rating supports mains-powered equipment
- IP54 protection resists dust and water splashes
- 250 in quick-connect tabs simplify wiring installation
Eaton 8004K20N1V2 rocker switch
The Eaton 8004K20N1V2 is a black non-illuminated rocker switch with SPDT contact form and three connections. It provides an On/Off/On maintained function rated for 10 A at 250 V AC, 15 A at 125 V AC and 15 A at 28 V DC. The switch carries cRUus, UL E2702 and RoHS approvals and is sealed to IP54.
Quick-connect terminals and mounting
The 0.250 in quick-connect tabs allow fast wiring without soldering. A rectangular mounting hole of 0.867 in by 1.734 in secures the switch in a panel cut-out. No separate brackets, actuators or illumination modules are included in the package.
Panel installation and common issues
Installation consists of pushing the switch into the prepared cut-out until the retaining clips engage. The most frequent problem is a cut-out that is too large or too small, which prevents the clips from locking or damages the housing. Verify the 0.867 in by 1.734 in dimensions before cutting. Ensure the circuit is de-energised before wiring the quick-connect tabs.
Highlights
- SPDT contact form enables three-way circuit control
- On/Off/On switching provides two active positions with centre off
- 10 A at 250 V AC rating supports mains-powered equipment
- IP54 protection resists dust and water splashes
- 250 in quick-connect tabs simplify wiring installation
Specifications
| Brand | EATON |
|---|
Questions about this item
Will the 0.250 in quick-connect tabs need re-crimping after years of vibration?
The 0.250 in tabs are a standard quick-connect size; periodic inspection for loose crimps is normal maintenance for any tab terminal.
At what current does the 15 A @ 28 V DC rating become the limiting factor during continuous operation?
The DC contact rating is 15 A at 28 V; sustained loads above that level will exceed the switch’s certified capacity.
Does the IP54 rating keep the switch cool enough when it carries 10 A @ 250 V AC all day?
IP54 seals against dust and splashing water but does not change the 10 A @ 250 V AC thermal limit; ensure adequate airflow around the 0.867 in x 1.734 in mounting cutout.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
