We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 2U rack-tower UPS in matte black metal, front LCD panel and eight NEMA 5-20R outlets visible

Eaton

Eaton 5P 5P2200RT 1950VA 1920W 120V 2U Rack/Tower Network

SKU CH-QBKM-MP93G

Line-interactive UPS delivering 1950 VA/1920 W with true sine-wave output, 4 ms transfer, eight NEMA 5-20R outlets, and hot-swappable battery in a 2U rack/tower form factor

  • True sine-wave output protects sensitive servers
  • 1950 VA 1920 W capacity runs critical loads
  • 2U rack or tower form factor fits dense racks
  • 8 NEMA 5-20R outlets connect multiple devices
  • Hot-swappable battery enables zero-downtime maintenance

Eaton 5P 5P2200RT UPS

The Eaton 5P 5P2200RT is a line-interactive uninterruptible power supply rated at 1950 VA and 1920 W for 120 V environments. It delivers true sine-wave output to protect sensitive servers, networking gear and storage arrays in rack or tower deployments. A single expansion slot accepts an optional network management card for remote monitoring. IT managers and facility engineers gain reliable battery backup in a compact 2U form factor.

2U rack/tower build with eight NEMA 5-20R outlets

The unit measures 3.4" high, 17.4" wide and 20.6" deep, weighing approximately 65 lb. Its metal chassis fits standard 19-inch racks or stands vertically as a tower. Eight NEMA 5-20R receptacles support locking cords, while the NEMA 5-20P input plug connects to 20 A branch circuits. Serial and USB ports provide local management, and the hot-swappable sealed lead-acid battery can be replaced without powering down connected loads.

4 ms transfer time and three-minute full-load

At full 1920 W load the internal battery sustains output for three minutes, extending to nine minutes at half load. The line-interactive topology corrects voltage fluctuations without battery drain, switching to battery in 4 ms during outages. Input voltage is 110 V AC with regulated 132 V AC output. Certifications include UL 1778, UL 497A, cUL and FCC Part 15 Class A for safe operation in commercial environments.

Highlights

  • True sine-wave output protects sensitive servers
  • 1950 VA 1920 W capacity runs critical loads
  • 2U rack or tower form factor fits dense racks
  • 8 NEMA 5-20R outlets connect multiple devices
  • Hot-swappable battery enables zero-downtime maintenance

Specifications

No published specifications for this item yet.

Questions about this item

Does the USB or serial port let the UPS shut down servers gracefully?

Yes, both USB and serial ports are present for management and graceful shutdown.

How much depth does the 2U chassis need inside a rack?

The unit is 20.6 inches deep, so the rack must provide at least that much usable depth.

What is the correct way to install the hot-swappable batteries?

Remove the front bezel, slide the battery tray out, insert the new pack, push the tray back until it clicks, then replace the bezel.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.