Dynaquip Controls
Dynaquip Controls VAE2.N0 1/2 in Drain Trap 29 in Hg 800 psi
Manual two-way carbon steel ball valve rated to 800 psi and 29 in Hg vacuum for water service
- TypeDrain Components
- MaterialHAWA
- Full vacuum capability with 29 in Hg rating
- High-pressure resilience up to 800 psi operating limit
- Durable carbon steel body with chrome-plated ball
- Full-port design for unrestricted flow capacity
- Three-piece construction allows easy inline maintenance
Manual Two-Way Ball Valve
This carbon-steel ball valve provides on-off control for water lines. The full-port design allows unrestricted flow when open. It is intended for manual operation in plumbing systems that require a straight-through inline valve. The non-locking handle prevents accidental position changes.
Pressure and vacuum limits
Verify that the system pressure does not exceed 800 psi and that vacuum conditions stay within 29 in Hg. The valve is not rated for steam or combustible gas service. Confirm the 1/2 inch nominal size matches the existing pipework before ordering.
Three-piece carbon steel body
The three-piece construction allows the centre section to be removed for cleaning or seal replacement without cutting the pipe. Chrome-plated carbon steel ball resists wear from water media. Straight body style suits standard inline installations. No 3-A sanitary rating applies.
Highlights
- Full vacuum capability with 29 in Hg rating
- High-pressure resilience up to 800 psi operating limit
- Durable carbon steel body with chrome-plated ball
- Full-port design for unrestricted flow capacity
- Three-piece construction allows easy inline maintenance
Specifications
| Type | Drain Components |
|---|---|
| Material | HAWA |
| Brand | Dynaquip Controls |
| Model | VAE2.N0 1/2 |
Questions about this item
Does the VAE2.N0 come with any fittings or gaskets, or must I supply them separately?
The valve ships as a standalone three-piece carbon steel body with a chrome-plated ball and non-locking handle; pipe fittings, thread sealant and gaskets are not included and must be sourced to match your 1/2 in piping.
How do I decide between this 1/2 in full-port carbon steel valve and a smaller or larger size?
Choose the 1/2 in full-port version when your line size is 1/2 in and you need unrestricted flow for water service at up to 800 psi; step to a different nominal size only if your piping diameter changes.
What does the 29 in Hg vacuum rating mean when the valve is installed in a real system?
It confirms the valve will maintain a tight seal under full vacuum up to 29 in Hg, so it can be used on suction lines or evacuated circuits without leaking air into the fluid stream.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
K Tool International
K-Tool International SF-7212 Pitman Arm Puller Ball Joint Separator Tie Rod Tool
$78.99
0.00095417BTC
In stock
