We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass electronic ball valve with black actuator housing, 3/4 inch FNPT connections

Dynaquip Controls

Dynaquip Controls bath faucet part

SKU CH-P81C-JBMR5

Electrically actuated two-way brass ball valve with 120V AC operation, 600 psi rating, IP66 protection, and 2.5-second cycle time

  • TypeHVACR and Appliance Controls
  • Electronic actuation opens or closes in 2.5 seconds
  • 600 psi rating handles demanding plumbing and HVAC systems
  • IP66 enclosure resists dust and powerful water jets
  • 120 V AC supply simplifies wiring in standard installations
  • Manual override and position indicator allow local control without power

Electrically Actuated Two-Way Ball Valve

This Dynaquip Controls valve uses a 120V AC actuator to rotate a chrome-plated brass ball through 90 degrees in 2.5 seconds. The straight two-piece body has a 3/4 inch FNPT connection and is rated for 600 psi operating pressure. It is suited for HVACR and appliance control systems that need reliable on-off flow control.

Sustained load behavior

The IP66-rated actuator includes thermal overload protection to guard against overheating during repeated cycling. Seals made from PTFE, RPTFE and FKM maintain integrity at the full 600 psi pressure rating. A fail-last position keeps the valve in its current state if power is lost, preventing unintended flow changes.

Installation and common issues

The 120V AC supply must match the actuator voltage exactly; incorrect voltage will prevent operation. Manual override and a position indicator allow local verification without tools. Debris in the line can damage the chrome-plated ball or RPTFE seats, so the piping should be flushed before the valve is fitted.

Highlights

  • Electronic actuation opens or closes in 2.5 seconds
  • 600 psi rating handles demanding plumbing and HVAC systems
  • IP66 enclosure resists dust and powerful water jets
  • 120 V AC supply simplifies wiring in standard installations
  • Manual override and position indicator allow local control without power

Specifications

BrandDYNAQUIP CONTROLS
TypeHVACR and Appliance Controls

Questions about this item

How much electrical power does the 120V AC actuator draw during continuous daily operation?

The actuator operates on 120V AC and completes a 90-degree cycle in 2.5 seconds with built-in thermal overload protection to prevent overheating during extended use.

What piping and electrical connections must already be in place to install this 3/4" FNPT valve?

Installation requires a 3/4 inch FNPT threaded pipe connection and a 120V AC power supply; the two-piece valve body and IP66-rated actuator mount directly into the line.

Will the chrome-plated brass ball and PTFE seals withstand older high-pressure lines rated near 600 psi?

Yes, the valve is rated for a maximum operating pressure of 600 psi with a chrome-plated brass ball, RPTFE seats, and PTFE and FKM seals designed for that pressure range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.