We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass pneumatic three-way ball valve with 115V AC solenoid actuator

Dynaquip Controls

Dynaquip Controls 1/2" Brass Pneumatic Ball Valve 3-Way L Flow 300 psi 115V AC

SKU CH-9BSA-SWEF3

A pneumatically actuated three-way brass ball valve with L-flow pattern, 115 V AC pilot solenoid and 300 psi rating

  • Size1/2"
  • TypeOther
  • Pneumatically actuated three-way valve simplifies flow control
  • 115 V AC pilot solenoid enables direct electrical operation
  • Brass one-piece body resists corrosion in plumbing systems
  • 300 psi pressure rating handles demanding water or air lines
  • L-port flow pattern directs media between three ports

1/2" Brass Pneumatic Ball Valve

This pneumatically actuated three-way ball valve uses a brass body with a one-piece construction and standard port design. It operates on an air-to-spring principle with a normally closed fail-safe position and includes a 115V AC pilot solenoid. The L-flow pattern directs media between ports for diverting applications.

Installers needing automated on-off control

Suited for systems requiring a compact brass valve rated for 300 psi operating pressure and 100 psi steam service with bottom entry inlet connections. Not for applications needing a two-way flow path or a manually operated valve without pneumatic actuation.

300 psi maximum operating pressure

This rating determines suitability for the intended service and matches the maximum operating pressure differential. The valve also carries a California Proposition 65 warning regarding chemicals known to cause cancer and reproductive harm.

Highlights

  • Pneumatically actuated three-way valve simplifies flow control
  • 115 V AC pilot solenoid enables direct electrical operation
  • Brass one-piece body resists corrosion in plumbing systems
  • 300 psi pressure rating handles demanding water or air lines
  • L-port flow pattern directs media between three ports

Specifications

BrandDYNAQUIP CONTROLS
Size1/2"
TypeOther

Questions about this item

What thread size does the 1/2" FNPT brass body require for piping?

The valve uses 1/2 inch FNPT threads on each port, so matching male NPT fittings are needed for a leak-free seal.

How is the 115V AC pilot solenoid wired for air-to-spring actuation?

Power the solenoid to open the valve; when voltage is removed the internal spring returns the actuator to the normally closed position.

When should the brass ball valve or its seals be inspected or replaced?

Inspect seals annually or after 100 psi steam service, and replace the valve if leakage appears at the 300 psi pressure limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.