We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular USB-to-TTL adapter in clear protective case with jumper pins visible

DSD TECH SH-U09C2 USB to TTL Adapter FTDI FT232RL 1.8V 3.3V 5V data converter

SKU CH-4W36-R1KCS MPN SH-U09C2

A USB-to-TTL adapter with an FTDI FT232RL chip, jumper-selectable 1.8V, 3.3V and 5V logic levels and a static-shielding case for firmware flashing and UART debugging on Windows, Linux and Mac

  • ColorMulticoloured
  • Dimensions2.54 in x 4.318 in x 8.89 in
  • Weight0.2 ounces
  • FTDI FT232RL chip ensures reliable serial communication for debugging and programming
  • Jumper-selectable 1.8V 3.3V 5V logic levels match diverse target devices
  • Transparent protective case prevents static interference and accidental short circuits
  • Compatible with Windows 7 8 10 Linux and Mac OS for broad system support
  • Supports firmware flashing router recovery ESP8266 programming and UART interfacing

USB-to-TTL adapter with FTDI FT232RL

This adapter uses an original FTDI FT232RL chip to convert USB signals to UART for debugging and programming. It suits engineers, programmers and hobbyists who work with routers, ESP8266 modules, GPS units or other UART devices. The jumper-selectable logic levels let you match 1.8V, 3.3V or 5V targets without extra hardware.

Thermals noise and power draw

The board draws power directly from the USB port and runs cool during typical flashing or debug sessions. A transparent case shields the circuitry from static discharge and accidental shorts while you handle it. No fan or active cooling is required for normal operation.

Sustained load behaviour

The FT232RL maintains stable communication at up to 3 Mbps during long firmware updates or continuous data logging. Driver support across Windows 7, 8, 10, Linux and Mac OS keeps the link reliable over extended periods. The protective case prevents intermittent faults caused by board flex or contamination.

Highlights

  • FTDI FT232RL chip ensures reliable serial communication for debugging and programming
  • Jumper-selectable 1.8V 3.3V 5V logic levels match diverse target devices
  • Transparent protective case prevents static interference and accidental short circuits
  • Compatible with Windows 7 8 10 Linux and Mac OS for broad system support
  • Supports firmware flashing router recovery ESP8266 programming and UART interfacing

Specifications

BrandDSD TECH
ModelSH-U09C2
Part NumberSH-U09C2
ColorMulticoloured
Dimensions2.54 in x 4.318 in x 8.89 in
Weight0.2 ounces

Questions about this item

How do I install the SH-U09C2 adapter and set the correct logic level for my target device?

Plug the adapter into a USB port, install the FTDI driver on Windows 7, 8, 10, Linux or Mac OS, then move the onboard jumper to match the required 1.8V, 3.3V or 5V TTL level before connecting the Dupont cable to the UART pins.

What maintenance or replacement will the SH-U09C2 need over time?

The FT232RL IC and jumper are solid-state with no moving parts; keep the transparent case fitted to block static discharge and accidental shorts, and the supplied Dupont cable can be swapped if its connectors wear out.

What is the first limit I will hit during sustained high-speed transfers with the SH-U09C2?

The FT232RL IC tops out at 3 Mbps, so continuous bulk endpoints will saturate at that throughput before any thermal or driver bottleneck appears.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.