We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red internal switch cable with spade and DuPont connectors, 300mm

Dimastech

Dimastech Switch Cable Red 300mm BT107

SKU CH-QAHK-QQGWE

Connects a vandal-resistant switch to the motherboard using spade terminals on one end and a 2-pin DuPont header on the other, 300 mm long

  • Cable Length1 ft.

Color Red 300mm

  • Connects vandal-resistant switch to motherboard
  • Spade connectors fit switch terminals securely
  • DuPont 1-2 pin plugs into motherboard header
  • Red 300mm length aids cable routing
  • Ready to install straight from the box

Vandal Switch Motherboard Link

This 300 mm cable connects a vandal resistant switch to a motherboard front panel header. One end uses spade terminals for the switch while the other provides a 2 pin DuPont connector for the board. The red sleeve helps identify the lead inside a busy chassis. It is intended for builders adding a durable external power or reset button.

Spade To DuPont Adapter Included

The cable ships as a single assembled lead with both connector types already crimped. No separate terminals, pins or sleeving are supplied so no extra assembly is required. The fixed 300 mm length determines the maximum distance between switch and header. Only the red variant is provided in this package.

Check Header Pinout And Reach

Verify that your motherboard front panel header uses a standard two pin layout compatible with a DuPont plug. Measure the routing path from the switch mounting point to the header to confirm 300 mm is sufficient. Builders needing a longer run or a different connector style will need an alternative cable.

Highlights

  • Connects vandal-resistant switch to motherboard
  • Spade connectors fit switch terminals securely
  • DuPont 1-2 pin plugs into motherboard header
  • Red 300mm length aids cable routing
  • Ready to install straight from the box

Specifications

Cable Length1 ft.

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the spade connectors on the switch end need replacing after repeated use?

The spade connectors are crimped to the cable; they are not designed for frequent mating cycles, so treat the cable as a permanent fit once installed.

What length limit appears first when routing the cable inside a case?

The cable is 300 mm long, so the reach between the vandal-resistant switch and the motherboard header is the practical limit.

Does the cable add noticeable heat or power draw when the system runs all day?

It is a passive 2-pin I/O link carrying only the switch signal, so it contributes no measurable heat or power consumption.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.