We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld digital clamp meter with 24mm jaw, yellow ABS body, backlit LCD, test leads and soft case

Digital Clamp Meter 600A 24mm

SKU CH-HXCS-9YRD2

Auto-ranging clamp meter measures AC current up to 600 A through 24 mm jaws, plus AC/DC voltage, resistance, NCV, diodes and continuity with backlit display

  • Featuresclamp meter, probe pens, batteries, user manual,soft packing
  • Height202 L x 64 W x 34 H millimeters
  • Width202 L x 64 W x 34 H millimeters
  • Length202 L x 64 W x 34 H millimeters
  • Weight371 grams
  • Sports Team1 Piece
  • Measures AC current up to 600 A without breaking the circuit
  • Jaw opens to 24 mm for conductors up to .94 inch
  • Non-contact voltage detection alerts above 90 V AC with beep and backlight flash
  • Built to IEC 61010 safety standards with double insulation CAT III 600 V
  • Auto-ranging multimeter covers AC/DC voltage, resistance, diode and continuity tests

Professional Clamp Meter

This auto-ranging digital clamp meter measures AC current up to 600A through a 24mm jaw without breaking the circuit. It also reads AC and DC voltage to 600V, resistance to 20MO, and provides diode and continuity tests with a 2000-count backlit display. The kit includes test leads, two AAA batteries, a manual and a soft carrying case.

Electricians and Field Technicians

The meter suits professionals needing non-contact voltage detection above 90V AC with audible and visual alerts, plus IEC 61010 CAT III 600V safety rating for industrial environments. It is not for users who require DC current measurement or true-RMS accuracy for distorted waveforms. Buyers needing higher jaw capacity or data-logging functions should look elsewhere.

Sustained Measurement Behaviour

Under continuous load the clamp maintains stated accuracy of ±3.0% rdg + 15 digits for AC current and ±1.0% rdg + 5 digits for AC voltage. Automatic power-off preserves the AAA cells during extended sessions, while the ABS housing and double insulation withstand daily workshop use. The backlight remains readable during long diagnostic routines without flicker.

Highlights

  • Measures AC current up to 600 A without breaking the circuit
  • Jaw opens to 24 mm for conductors up to .94 inch
  • Non-contact voltage detection alerts above 90 V AC with beep and backlight flash
  • Built to IEC 61010 safety standards with double insulation CAT III 600 V
  • Auto-ranging multimeter covers AC/DC voltage, resistance, diode and continuity tests

Specifications

BrandaFe Power
Featuresclamp meter, probe pens, batteries, user manual,soft packing case, Iec, Battery Powered, true
Height202 L x 64 W x 34 H millimeters
Width202 L x 64 W x 34 H millimeters
Length202 L x 64 W x 34 H millimeters
Weight371 grams
Sports Team1 Piece
TypeClamp

Questions about this item

What maximum conductor diameter fits inside the 24 mm jaw?

The clamp opens to 24 mm so any insulated wire up to that diameter can be measured without breaking the circuit.

Will the NCV alert trigger on a 12 V DC automotive circuit?

No, the non-contact voltage function only responds to AC voltage above 90 V, so low-voltage DC wiring will not activate the beeper or backlight flash.

How can I confirm the meter is reading correctly after turning it on?

Select the resistance range, touch the probe tips together, and verify the display shows a value near zero ohms; the continuity beeper should also sound.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.