Digi International
Digi International 70002038 PortServer TS 4-port Fast Ethernet device server
Connects up to four serial devices to a 10/100Base-TX Fast Ethernet network
- Connect four serial devices over Fast Ethernet
- 10/100Base-TX network standard ensures reliable connectivity
- Compact 5.3" x 3.3" x 1" form factor fits tight spaces
- PortServer TS series built for industrial device networking
- 100 Mbps Ethernet speed handles legacy serial traffic
Digi PortServer TS 4-Port Device Server
The Digi International PortServer TS 70002038 connects up to four serial devices to a 10/100Base-TX Fast Ethernet network. It suits industrial automation, remote equipment monitoring and legacy serial integration projects that need reliable IP connectivity. The compact metal chassis measures 5.3 by 3.3 by 1 inches for DIN-rail or wall mounting.
Four RJ-45 serial ports with 10/100 Ethernet
The decisive specification is the four serial ports presented on RJ-45 connectors alongside a single 10/100Base-TX Ethernet uplink. Each serial port supports asynchronous communication for console servers, PLCs, meters or modems. No other port count or Ethernet speed is available on this model.
Fanless operation with low power draw
The unit runs without fans, so acoustic noise is zero in normal use. Power consumption stays modest because the Fast Ethernet PHY and serial transceivers draw little current. The small enclosure dissipates heat passively across its 5.3-inch height and 3.3-inch width.
Highlights
- Connect four serial devices over Fast Ethernet
- 10/100Base-TX network standard ensures reliable connectivity
- Compact 5.3" x 3.3" x 1" form factor fits tight spaces
- PortServer TS series built for industrial device networking
- 100 Mbps Ethernet speed handles legacy serial traffic
Specifications
No published specifications for this item yet.
Questions about this item
What does the 4-port 10/100Base-TX rating mean when the PortServer TS 70002038 is installed in a rack?
The four serial ports share a single 100 Mbps Fast Ethernet uplink, so aggregate serial-to-network throughput is capped at the 100Base-TX line rate.
Which Ethernet standard does the 70002038 use and what speed does it limit the device to?
It uses 10/100Base-TX Fast Ethernet, limiting the network link to 100 Mbps full-duplex.
Will the 5.3" by 3.3" by 1" chassis fit in a standard 1U rack shelf?
At 1" deep and 5.3" high it fits easily in a 1U shelf, but you must verify the shelf's usable width exceeds 3.3".
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
