We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular Dell YF-1205 power adapter with bare wire leads and quick connector

Dell YF-1205 12V 5A 60W power adapter

SKU CH-E4P2-REQ0Y

Converts 100-240V AC to 12V DC at up to 5A with bare-wire output and a quick connector for LED strips and other 12V devices

  • Type9 V
  • Changer TypeUSB C Charger
  • ColorBlack
  • Specifications60 watts, 12 volts_of_direct_current, 5 amps, 110 volts_of_a
  • Connector ABare Wires
  • Connector BBare Wires
  • Powers 12 V LED strips up to 60 W
  • Accepts 100 to 240 V AC input worldwide
  • Built-in overload, over-voltage, over-current and short-circuit protection
  • Quick connector clips bare wires without soldering
  • FCC, CE, RoHS and CCC safety compliance

Dell YF-1205 60W 12V power adapter

The Dell YF-1205 is a 60W AC-to-DC converter supplying 12V at up to 5A. It powers LED strip lights and other 12V devices drawing less than 5A, such as loads rated at 1.1A, 1.2A, 1.4A, 1.5A, 1.8A, 2.5A, or 3.5A. The unit accepts 100-240V AC input at 50/60Hz. It includes a bare-wire output and a quick connector for solder-free attachment.

Replacing undersized or failed 12V supplies

Swap this adapter in when an existing 12V brick cannot deliver the required current or has lost regulation. The jump is worth it if your load sits between 1A and 5A and the old unit trips its protection or runs hot. Built-in safeguards cover overload, over-voltage, over-current, over-temperature, and short-circuit events. The supply carries FCC, CE, RoHS, and CCC compliance marks.

Bare-wire hookup with quick connector

Installation requires stripping the device leads and clipping them into the supplied quick coupler; no soldering is needed. Polarity is critical: the red cord is positive and the black cord is negative. A reversed connection will prevent operation and may damage the load. Verify the device voltage and current rating match the 12V 5A output before powering on.

Highlights

  • Powers 12 V LED strips up to 60 W
  • Accepts 100 to 240 V AC input worldwide
  • Built-in overload, over-voltage, over-current and short-circuit protection
  • Quick connector clips bare wires without soldering
  • FCC, CE, RoHS and CCC safety compliance

Specifications

BrandDell
SeriesYF-1205
ModelYF-1205
Type9 V
Changer TypeUSB C Charger
ColorBlack
Specifications60 watts, 12 volts_of_direct_current, 5 amps, 110 volts_of_alternating_current, Bare Wires, 50-60Hz, type_b_3pin_na, 0, 12V LED Strip Light and other 12V devices, YF-1205
Connector ABare Wires
Connector BBare Wires
Cable Jakcet TypePlastic
Connector StyleMale
Features12V LED Strip Light and other 12V devices, Bare Wires, Corded Electric, 0, 60 watts
Dimensions14.33in W x 12.83in H x 9.06in D
Weight0.25 pounds
Package Quantity100
Package Contents100
Disclaimernot_applicable

Questions about this item

What type of AC plug does the YF-1205 use for mains connection?

The unit includes a standard type B three-pin North American power cord rated for 100 to 240 volts AC at 50 or 60 hertz.

How do I connect the bare output wires without soldering?

Clip the red positive and black negative leads into the supplied quick coupler; the coupler accepts the bare wires directly for a tool-free connection.

When should the internal thermal protection be expected to trip?

The built-in over-temperature safeguard activates automatically if the adapter exceeds its safe operating limit during continuous 60 watt loads.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.