We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Genuine Dell 285 mm ODD SATA cable with 90° connector for Precision 3620

DELL

DELL Precision 3620 ODD SATA Cable 285MM 90° V702D

SKU CH-Y55D-SJFPD

A 285 mm SATA data cable with a 90° connector for the Precision 3620 optical drive

  • Genuine Dell OEM part ensures exact fit
  • 285 mm length suits Precision 3620 chassis routing
  • 90 degree connector eases tight drive-bay installs
  • SATA data link for optical drive connectivity
  • Part number V702D confirms Precision 3620 compatibility

Genuine Dell OEM SATA Cable

This genuine Dell OEM SATA data cable is designed specifically for the Precision Workstation 3620 desktop. It connects an optical disk drive to the motherboard using the standard SATA interface. The part number V702D ensures exact fit and function for service or upgrade work on this platform.

285 mm Length with 90° Connector

The cable measures 285 mm excluding connectors, providing a direct routing path inside the 3620 chassis. A 90 degree connector on one end allows a tight turn against the drive or board, reducing strain on the SATA port. This fixed length suits the factory drive bay layout; it will not reach relocated or additional devices.

SATA Interface Practical Limits

The cable carries the SATA signal between drive and host controller at the rated bus speed. Signal integrity is maintained within the specified 285 mm run; longer or daisy-chained cables would exceed the electrical budget. The 90 degree end does not change the electrical specification but demands careful alignment during installation to avoid bent pins.

Highlights

  • Genuine Dell OEM part ensures exact fit
  • 285 mm length suits Precision 3620 chassis routing
  • 90 degree connector eases tight drive-bay installs
  • SATA data link for optical drive connectivity
  • Part number V702D confirms Precision 3620 compatibility

Specifications

BrandDell

Questions about this item

Will the 285 mm SATA cable reach the optical drive bay in a Precision 3620 without putting tension on the motherboard connector?

The cable is 285 mm long excluding connectors and is the genuine Dell OEM part designed for the Precision 3620 chassis, so it matches the factory routing distance.

How can I confirm the 90-degree connector is seated correctly after installing the cable in my Precision 3620?

The right-angle plug should sit flush against the drive or motherboard header with the latch clicking audibly; the system will then detect the optical drive in BIOS on first boot.

Does the package include only the V702D SATA data cable or are mounting screws and a power adapter also supplied?

You receive exactly the 285 mm ODD SATA data cable with a 90-degree connector shown in the photos; mounting hardware and power cables are not included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.