We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dell PowerEdge R340 SAS cable for 4x 3.5 inch drives

DELL

DELL PowerEdge R340 SAS Cable 4x3.5 PERC S140 VTP09

SKU CH-BBXN-0NQFE

Connects four 3.5-inch hot-swappable drives to the PERC S140 RAID controller in a PowerEdge R340 server

  • Hot-swap support keeps the R340 running during drive changes
  • Connects four 3.5-inch bays to the PERC S140 controller
  • SAS interface provides reliable data transfer for RAID arrays
  • Purpose-built for the PowerEdge R340 server chassis
  • Dell part VTP09 ensures exact fit and compatibility

Purpose and fit

This SAS cable is built for the Dell PowerEdge R340 server and connects four 3.5-inch hot-swappable drive bays to the PERC S140 RAID controller. It is intended for administrators who need to maintain or expand internal storage while keeping the server online during drive changes.

Compatibility check

Verify that the server chassis is the 4-bay 3.5-inch hot-swappable variant and that a PERC S140 controller is installed. The cable will not fit 2.5-inch bay configurations or servers without the matching backplane and controller combination.

Thermals noise and power

The cable is a passive assembly with no active components, so it adds no heat, noise or power draw of its own. Drive and controller thermals remain governed by the server cooling design and the workload on the installed drives.

Highlights

  • Hot-swap support keeps the R340 running during drive changes
  • Connects four 3.5-inch bays to the PERC S140 controller
  • SAS interface provides reliable data transfer for RAID arrays
  • Purpose-built for the PowerEdge R340 server chassis
  • Dell part VTP09 ensures exact fit and compatibility

Specifications

No published specifications for this item yet.

Questions about this item

Does the VTP09 cable include the PERC S140 controller or just the cable itself?

The VTP09 is the SAS cable only; the PERC S140 RAID controller is a separate component.

Is the VTP09 the correct cable for a PowerEdge R340 with four 3.5-inch bays?

Yes, this cable is built for a 4-bay 3.5-inch hot-swappable configuration in the PowerEdge R340.

Will this cable support hot-swap drive replacement while the R340 stays powered on?

Yes, it enables hot-swappable capability so drives can be added or removed without powering down the server.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.