We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R240 SAS SATA Backplane Cables VG7KV 02KN4G

SKU CH-H91K-S2YA1

Connects SAS or SATA hard disk backplane to the motherboard or RAID controller in PowerEdge R240 servers for reliable storage operations

  • Connects SAS and SATA drives in PowerEdge R240 servers
  • Supports stable data transfer for RAID and non-RAID setups
  • Delivers power and signal through dedicated backplane cables
  • Designed for Dell PowerEdge R240 compatibility
  • Includes two cables for complete backplane installation

Dell PowerEdge R240 Backplane Cables

These cables connect the SAS or SATA hard disk backplane to the motherboard or RAID controller inside Dell PowerEdge R240 servers. They carry data and power between the drives and the system for stable storage operation. The set is built for the R240 platform and uses Dell part numbers VG7KV and 02KN4G.

Suits technicians servicing an R240

The cables fit Dell PowerEdge R240 chassis that use SAS or SATA backplanes in RAID or non-RAID layouts. They are not for servers outside the PowerEdge R240 line. They are not for installations that require a different backplane connector type or cable length.

Connector interface: SAS and SATA

The only specification that decides fit is the dual SAS and SATA interface on the backplane side. If the R240 backplane uses this interface the cables will mate correctly. Any other interface means the part will not work.

Highlights

  • Connects SAS and SATA drives in PowerEdge R240 servers
  • Supports stable data transfer for RAID and non-RAID setups
  • Delivers power and signal through dedicated backplane cables
  • Designed for Dell PowerEdge R240 compatibility
  • Includes two cables for complete backplane installation

Specifications

No published specifications for this item yet.

Questions about this item

What limits sustained data throughput when these cables connect the backplane to the RAID controller?

The SAS and SATA interface speeds of the connected drives and controller set the practical throughput ceiling for these backplane cables.

How much heat or power do the VG7KV cables add when the R240 runs continuously?

The cables themselves draw no power and generate negligible heat; thermal load comes from the drives and controller they link.

Which Dell server must already be installed for these 02KN4G cables to function?

They are built exclusively for the Dell PowerEdge R240 chassis and backplane.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.