We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dell PERC dual Mini SAS HD cable 17 inches SFF-8643 connectors for PowerEdge R630 R730

DELL

Dell PERC Dual Mini SAS 17" RAID Cable SFF-8643 R630 R730 DK50W

SKU CH-17VV-HCDFG

A 17-inch dual Mini SAS HD cable connecting PERC controllers to 10-bay backplanes in PowerEdge R630 and R730 servers at 12Gbps SAS 3.0 speeds

  • TypeSAS Raid Cable
  • Length17 inches
  • Connector Number2
  • Connector DetailMini SAS HD (SFF-8643) to Backplane
  • Terminal GenderMale to Male
  • FeaturesOEM Dell cable Compatible with R630/R730 17" long dual Mini
  • Connects PERC controller to 10-bay backplane
  • 17-inch length fits R630 and R730 chassis
  • Dual SFF-8643 connectors support 12Gbps SAS 3.0
  • Shielded construction ensures reliable data integrity
  • Genuine Dell OEM part number 5DP9R

Dell PERC SAS RAID Cable

This 17-inch Dell PERC Dual Mini SAS cable connects a RAID controller to the 10-bay backplane in PowerEdge R630 and R730 servers. It is built for administrators who need a direct replacement link for internal storage arrays. The SFF-8643 connectors mate with the controller and backplane without adapters. Buyers who need a different length or a single-connector cable cannot use this part.

Thermals and Power

The passive shielded cable carries 12Gbps SAS 3.0 signals without active components, so it adds no heat or noise to the chassis. Power draw is limited to the signalling current supplied by the controller and backplane. No fan or external power connection is required. Installers who expect active signal conditioning will not find it here.

Build and Connectors

Dual male Mini SAS HD plugs lock into the PERC controller and the SFF backplane with a positive latch. The 17-inch routing suits the standard drive-bay spacing in R630 and R730 2.5-inch chassis. Shielded construction protects signal integrity across the full length. Technicians working in larger enclosures or with 3.5-inch trays may find the reach too short.

Highlights

  • Connects PERC controller to 10-bay backplane
  • 17-inch length fits R630 and R730 chassis
  • Dual SFF-8643 connectors support 12Gbps SAS 3.0
  • Shielded construction ensures reliable data integrity
  • Genuine Dell OEM part number 5DP9R

Specifications

BrandDell
Model5DP9R
TypeSAS Raid Cable
Length17 inches
Connector Number2
Connector DetailMini SAS HD (SFF-8643) to Backplane
Terminal GenderMale to Male
FeaturesOEM Dell cable
Compatible with R630/R730
17" long dual Mini SAS
Connects PERC controller to backplane

Questions about this item

How is the 17-inch dual Mini SAS HD cable installed between the PERC controller and the 10-bay backplane in an R630?

Route the 17-inch cable from the PERC controller SFF-8643 ports to the matching backplane connectors, ensuring the latch tabs click fully into place on both ends.

What maintenance or replacement will the SFF-8643 connectors and shielding need over time?

Inspect the latch tabs and shielded jacket during any drive bay service; replace the cable if tabs are cracked or the shielding shows kinks or abrasion.

What limit appears first on this cable when the server runs sustained 12Gbps SAS 3.0 traffic?

The 17-inch shielded assembly is rated for 12Gbps SAS 3.0; signal integrity at that rate is the first boundary under continuous heavy I/O.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.