DELL
DELL NEC NP-PA622UJL 350W Projector Lamp NP26LP
A replacement lamp module with a 350 W UHP bulb and housing delivers 3,000 to 4,000 hours of projection time
- TypeUHP
- Wattage350W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Ready-to-install module with bulb and housing
- Philips UHP 350W bulb for bright projection
- 3,000 hours normal or 4,000 hours economy life
- Built to ISO9001 quality standards
- Tested for beam performance, ignition and run-time
NEC NP-PA622UJL projector lamp with 350 W UHP bulb
This replacement module is a fully assembled bulb and housing unit designed for compatible NEC projectors. It arrives ready for installation without the need to handle a bare lamp. The unit uses a Philips UHP lamp rated at 350 watts.
Suitable for owners of NEC projectors requiring
Buyers who need a different lamp code or a lower-wattage lamp for another projector model should look elsewhere. The lamp life is rated at 3,000 hours in normal mode and 4,000 hours in economy mode.
350 W Philips UHP lamp
The single specification that determines fit is the 350-watt UHP lamp type matched to the NP-PA622UJL and NP26LP part numbers. Verify your projector requires this exact lamp code before ordering.
Highlights
- Ready-to-install module with bulb and housing
- Philips UHP 350W bulb for bright projection
- 3,000 hours normal or 4,000 hours economy life
- Built to ISO9001 quality standards
- Tested for beam performance, ignition and run-time
Specifications
| Brand | NEC |
|---|---|
| Type | UHP |
| Wattage | 350W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Does the NP26LP module use a standard UHP interface, and what wattage does that limit the projector to?
The lamp uses a UHP type bulb rated at 350W, so the projector operates at that wattage.
What physical housing does the NP26LP lamp ship in, and will it fit the NEC PA622UJL without modification?
It arrives as a fully assembled bulb and housing module built to the NP26LP form factor for direct fit.
How is the NP26LP lamp installed, and which step do users most often skip?
Power off and cool the projector, open the lamp cover, remove the old module, insert the new one until it seats firmly, then reset the lamp timer in the menu.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



