DELL
DELL Latitude E6420 14" LCD Ribbon Cable RCD0V WXGA 1366 x 768
A genuine Dell OEM ribbon cable for 14-inch WXGA HD 1366 x 768 LCD screens on Latitude E6420 laptops
- Typelaptop-computer-replacement-parts
- Genuine Dell OEM part ensures exact fit
- Designed for Latitude E6420 models only
- Supports 1366 x 768 WXGA HD resolution
- 14 inch LCD ribbon cable matches RCD0V
- Tested and guaranteed to work perfectly
Genuine Dell LCD ribbon cable for Latitude E6420
This is a genuine Dell OEM replacement ribbon cable designed for the Latitude E6420 laptop. It connects the 14-inch WXGA LED display panel to the motherboard. The part number is RCD0V. It is intended for repair technicians or owners replacing a damaged display cable. ||
Verify your screen resolution before ordering
This cable works only with Latitude E6420 models that have a native 1366 x 768 WXGA HD LCD panel. Systems equipped with a higher resolution screen require a different cable. Confirm your part number matches RCD0V or check the display specifications in the service manual. The cable supports the integrated webcam connection. ||
Replaces a faulty or worn display cable
It restores video signal and camera function when the original ribbon cable fails due to hinge stress or fatigue. The upgrade is worth it if you experience flickering, artefacts or a blank screen on a known-good panel. It is not suitable for Latitude E6420 units with higher resolution displays.
Highlights
- Genuine Dell OEM part ensures exact fit
- Designed for Latitude E6420 models only
- Supports 1366 x 768 WXGA HD resolution
- 14 inch LCD ribbon cable matches RCD0V
- Tested and guaranteed to work perfectly
Specifications
| Brand | Dell |
|---|---|
| Type | laptop-computer-replacement-parts |
Questions about this item
Does the cable arrive with any screws, brackets or adhesive strips, or must they be sourced separately?
Only the ribbon cable shown in the photograph is included; mounting hardware and adhesive are not supplied and must be obtained separately.
My Latitude E6420 has a 1366 x 768 screen — is the RCD0V the correct cable or do I need a different part?
The RCD0V is built specifically for the 14 inch WXGA panel at 1366 x 768; it will not fit higher-resolution or touchscreen variants.
After fitting the RCD0V, will the 1366 x 768 display work at its native resolution without further configuration?
Yes — the cable carries the native 1366 x 768 signal directly, so the panel operates at its full resolution immediately after installation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



