minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008189BTC
In stock
DELL
DELL H8PGN 8GB DDR4 2133 ECC Registered server RAM
Refurbished 8 GB DDR4 ECC registered DIMM running at 2133 MHz with CL15 latency and 1.20 V operation
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 8 GB capacity supports larger server workloads
- DDR4 2133 (PC4 17000) speed delivers rated throughput
- ECC Registered design corrects errors and buffers signals
- CL15 CAS latency at 1.20 V balances timing and power
- 288-pin DIMM form factor fits standard DDR4 server slots
Dell 8GB DDR4 2133 ECC Registered DIMM
This 8GB DDR4 module runs at 2133 MHz with a CAS latency of 15 and operates at 1.20V. It uses a 288-pin registered design with ECC and a 2Rx8 rank layout. The part is aimed at administrators who need to maintain or expand existing DDR4 server platforms that require registered memory.
Replaces a failed stick
The jump is worth it when the system already uses DDR4 2133 registered ECC modules and the board has free 288-pin slots. It will not work in platforms that require unbuffered memory, non-ECC memory, or a different DDR generation. Buyers who need higher speeds, larger densities or unbuffered operation must look elsewhere.
Limited to the DDR4 2133 registered ECC standard
The 288-pin form factor and registered signal processing mean the module only fits motherboards wired for registered DDR4. Speed is capped at 2133 MHz and latency at CL15, so faster DDR4 standards or mixed-rank configurations may not be supported. Systems that demand unbuffered DIMMs or a different voltage cannot use this part.
Highlights
- 8 GB capacity supports larger server workloads
- DDR4 2133 (PC4 17000) speed delivers rated throughput
- ECC Registered design corrects errors and buffers signals
- CL15 CAS latency at 1.20 V balances timing and power
- 288-pin DIMM form factor fits standard DDR4 server slots
Specifications
| Brand | Dell |
|---|---|
| Model | H8PGN |
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Shipping weight | 2.31 kg |
| Package size | 229 × 152 × 25 mm |
Questions about this item
Will this 288-pin DDR4 DIMM fit my server's memory slots?
The module uses the standard 288-pin DDR4 DIMM form factor, so it fits any server board with DDR4 RDIMM slots.
Do I need to configure anything in the BIOS after installing this ECC Registered memory?
Most servers detect the CL15 timing and 1.20 V automatically; the common mistake is mixing registered and unbuffered DIMMs in the same channel.
How can I tell when this 8 GB module should be replaced?
Run the server's built-in memory diagnostics periodically; replace the DIMM if ECC correctable errors rise sharply or the test reports a hard failure.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Intel
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466
$1,097.99
0.0128638BTC
In stock