Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Delivers 24 V DC at up to 4 A with 96 W output, includes overload and over-temperature protection, and fits 5.5 × 2.5 mm barrel connectors
The Dell ALT-2404 is a 24V 4A power adapter delivering up to 96W for compatible devices. It accepts 100-240V AC input at 50/60Hz and provides a regulated 24V DC output through a 5.5mm x 2.5mm barrel connector. Safety features include overload, over-voltage, over-current, over-temperature and short-circuit protection. The unit ships with an AC input cable and a flame-retardant housing.
This adapter powers LED strips, CCTV cameras, LCD monitors, massage chairs, 3D printer AMS units, routers, switches and similar 24V loads that do not exceed 96W. The 5.5mm x 2.5mm plug also fits 5.5mm x 2.1mm sockets with centre-positive polarity. It is not for devices that require a different voltage, need more than 4A, use a different connector type, or require battery-charging circuitry.
The single figure that determines fit is the 24V DC output rated at 4A maximum. Your device must list a 24V input and a current draw of 4A or less. If the unit needs higher current, a different voltage, or a non-barrel connector, this adapter will not work.
| Brand | Dell |
|---|---|
| Series | ALT-2404 |
| Model | ALT-2404 |
| Type | 9 V |
| Changer Type | USB C Charger |
| Cable Length | 5 in. |
| Specifications | 96 watts, 24 volts_of_direct_current, 4 amps, 110 volts_of_alternating_current, 5.5mm x 2.5mm 2.1mm dc plug, 50/60 Hz, type_a_2pin_na_jp, 0, LED Light, 3D Printer AMS, Router, ADSL Cats, HUB, Switches, Security Cameras, Monitor, ALT-2404 |
| Connector A | 5.5mm x 2.5mm 2.1mm dc plug |
| Connector B | 5.5mm x 2.5mm 2.1mm dc plug |
| Connector Style | Male |
| Features | LED Light, 3D Printer AMS, Router, ADSL Cats, HUB, Switches, Security Cameras, Monitor, 5.5mm x 2.5mm 2.1mm dc plug, Corded Electric, 0, AC to DC, 96 watts |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
| Weight | 400 grams |
| Package Quantity | 1 |
| Package Contents | 1 |
| Disclaimer | 24 months, not_applicable |
It uses a 5.5mm x 2.5mm male plug that is also compatible with 5.5mm x 2.1mm jacks, with centre-positive polarity.
Plug the supplied AC input power cable into the adapter's IEC inlet, then into a 100-240V 50/60Hz mains socket; the step often missed is seating the IEC cable fully until it clicks.
Replace the 3x 0.75 mm² (18AWG) cable if the PVC jacket cracks, conductors are exposed, or the barrel plug becomes loose or intermittent.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?