DELL
DELL A8711889 32GB DDR4 2400MHz ECC Registered LRDIMM server RAM
32 GB DDR4 ECC registered LRDIMM running at 2400 MHz with CL17 latency for compatible Dell PowerEdge servers
- ECC protection prevents data corruption in critical workloads
- 32 GB single module maximises capacity per slot
- 2400 MHz DDR4 speed matches PC4-19200 standard
- Registered LRDIMM design reduces electrical load on memory bus
- Compatible with PowerEdge R630 R730 R930 and M830 servers
Capacity and fit
This module provides 32 GB of DDR4 memory in a single LRDIMM package. It is built for Dell PowerEdge servers including the R630, R730, R730XD, R930, M630, M830, C4130, FC630, FC830 and T630. The 288-pin registered design with ECC suits administrators who need high-density error-correcting memory for virtualised workloads.
Sustained load behaviour
Operating at 2400 MHz with a CL17 latency, the module maintains the DDR4-2400/PC4-19200 data rate during continuous operation. Registered signal processing reduces electrical loading on the memory bus, allowing the platform to keep all channels populated without timing degradation. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute runs.
Thermals, noise and power
The 1.20 V operating voltage keeps power draw low for a 32 GB LRDIMM, reducing the thermal contribution inside dense chassis. Passive operation means the module adds no acoustic noise of its own. Lower heat output eases the burden on server fan curves, helping the system maintain quieter cooling profiles under typical utilisation.
Highlights
- ECC protection prevents data corruption in critical workloads
- 32 GB single module maximises capacity per slot
- 2400 MHz DDR4 speed matches PC4-19200 standard
- Registered LRDIMM design reduces electrical load on memory bus
- Compatible with PowerEdge R630 R730 R930 and M830 servers
Specifications
No published specifications for this item yet.
Questions about this item
Does the 1.20 V DDR4 module run cool enough for 24/7 server duty?
The LRDIMM operates at the standard DDR4 voltage of 1.20 V, which keeps power draw and heat low enough for continuous operation in dense PowerEdge chassis.
Will this single 32 GB stick work alone or do I need a matched pair?
The registered ECC design allows single-module population; you can install one 32 GB A8711889 without a matched pair, provided the server slot supports LRDIMMs.
Can I mix this 2400 MHz LRDIMM with older RDIMMs in my R730?
Dell does not support mixing LRDIMMs with standard RDIMMs in the same PowerEdge R730; all slots must use the same registered memory type for stable operation.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



