Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Delivers 5 V 5 A (25 W) AC-to-DC power with 5.5×2.5 mm plug, screw terminal for 18-22 AWG wire, overload, short-circuit and over-voltage protection, and aluminum housing rated to 45 °C at 80 % load
This Dell 5V5A adapter converts 100-240V AC to a regulated 5V DC output rated at 5A and 25W. It is built for industrial equipment such as 3D printers, LED matrix panels, POE switches, PLCs and CCTV systems rather than consumer electronics charging. The aluminum alloy housing with ventilation slots keeps the unit at 45°C when running at 80% load.
The unit provides a 5.5x2.5mm male barrel plug that also fits 5.5x2.1mm jacks plus a screw terminal block accepting 18-22AWG wire for direct connection. Polarity is fixed as inner positive and outer negative. This dual interface replaces fixed-cable supplies where wiring must be customised or secured against vibration.
The manufacturer recommends a maximum of 4A continuous draw to maintain the stated thermal performance. Integrated overload cut-off, short-circuit and over-voltage protections trigger with auto-recovery when limits are exceeded. The ±2% voltage regulation holds across the full input range but degrades if the continuous current guideline is ignored.
| Brand | Dell |
|---|---|
| Series | 5V5A power adapter |
| Model | 5V5A power adapter |
| Type | 9 V |
| Changer Type | USB C Charger |
| Specifications | 25 watts, 5 volts, 5 amps, 240 volts, DC 5.5x 2.5mm, 0, 3D Printers, LED Matrix, POE Switches, Industrial Equipment, 5V5A power adapter |
| Connector A | DC 5.5x 2.5mm |
| Connector B | DC 5.5x 2.5mm |
| Connector Style | Male |
| Features | 3D Printers, LED Matrix, POE Switches, Industrial Equipment, DC 5.5x 2.5mm, Corded Electric, 0, AC to DC, 25 watts |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
| Package Quantity | 1 |
| Package Contents | 1 |
| Disclaimer | 1 Year Warranty, not_applicable |
Allow at least 25 mm free space around the aluminum alloy housing so the ventilation slots can keep the unit at 45 °C when running at 80 % load.
Confirm the polarity marking Inner (+) / Outer (-) before tightening the terminal screws, otherwise the connected equipment receives reversed voltage.
Plan replacement if the housing temperature regularly exceeds 45 °C or if the overload cut-off trips repeatedly, indicating the protection circuit is fatigued.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?