We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminum three-blade propeller 16 inches diameter 23.3 degree pitch

Dayton

Dayton VE10E028PG 16" 23.3° 3-Blade Blower

SKU CH-9B6J-1FTXR

A 16-inch aluminium propeller with three blades at 23.3-degree pitch, 1/2-inch bore, rated for 1/4 hp at 1750/1742 rpm

  • 16 inch diameter moves air efficiently in tight spaces
  • 3 degree pitch optimises airflow for direct drive systems
  • Three aluminium blades reduce weight while resisting corrosion
  • 1/2 inch bore fits standard 12.7 mm motor shafts
  • 1750 RPM rating suits quarter horsepower motor applications

Product Identity

The Dayton VE10E028PG is a 16 inch diameter aluminum propeller with three blades set at a 23.3 degree pitch. It mounts on a 12.7 mm bore and operates at 1750 RPM in either clockwise or counter-clockwise rotation.

Suitability

This blower wheel suits direct-drive HVAC assemblies requiring a 1/4 hp rated propeller with an intake-side hub. It will not suit belt-driven housings, applications needing a different bore size, or systems that demand a higher blade count or alternate pitch angle.

Capacity and Headroom

The 16 inch diameter and 23.3 degree pitch move air adequately for 1/4 hp motors running at 1750 RPM. Headroom disappears if the motor exceeds that horsepower or speed rating, or if the installation requires a discharge-side hub configuration.

Highlights

  • 16 inch diameter moves air efficiently in tight spaces
  • 3 degree pitch optimises airflow for direct drive systems
  • Three aluminium blades reduce weight while resisting corrosion
  • 1/2 inch bore fits standard 12.7 mm motor shafts
  • 1750 RPM rating suits quarter horsepower motor applications

Specifications

BrandDAYTON

Questions about this item

What motor shaft size is needed for the 1/2 in bore on this 16 in propeller?

The propeller has a 1/2 in bore diameter (12.7 mm) and is designed for direct drive, so the motor shaft must match that exact size for a secure fit.

Will this 3-blade propeller with 23.3° pitch work on a motor rated at 1/4 hp and 1750 RPM?

Yes, the specifications list 1/4 hp and 1750/1742 RPM as the operating parameters, so a motor with those ratings will drive the propeller correctly.

How can I confirm the propeller is rotating in the proper direction after installation?

The propeller supports both CW and CCW rotation; verify airflow moves toward the intake side of the hub to confirm it matches your system's required direction.

More in Blowers

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.