We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 16 inch aluminum propeller four blades clockwise rotation

Dayton

Dayton VE10D972PG Propeller 16 in 25.8 Deg Pitch

SKU CH-ZZ5H-XWHMJ

A 16-inch aluminium propeller with 25.8-degree pitch, 1/2-inch bore and four blades for direct-drive blowers

  • 16 in diameter moves more air per revolution
  • 8 degree pitch optimises airflow at 1620 RPM
  • Four aluminium blades resist corrosion and reduce weight
  • 1/2 in bore fits standard 1/4 hp direct-drive motors
  • Clockwise rotation with intake hub directs air efficiently

16-inch Propeller for Direct-Drive Blowers

The Dayton VE10D972PG is a 16-inch aluminum propeller designed for direct-drive blower assemblies. It suits maintenance technicians and system integrators replacing a worn impeller in existing HVAC equipment. The four-blade, clockwise-rotation design matches the original specification for compatible units.

25.8-Degree Pitch and 1/4 HP Rating

At 25.8 degrees pitch and a 1620 RPM operating speed, the propeller moves air volumes appropriate for quarter-horsepower direct-drive motors. It delivers rated airflow when paired with the correct motor and housing. Performance drops if the motor cannot maintain speed under load or if static pressure exceeds the design envelope.

12.7 mm Bore with Intake-Side Hub

The 1/2-inch bore fits standard motor shafts on direct-drive blowers using a set-screw or keyed connection. Intake-side hub location positions the blades correctly within the housing scroll. Aluminum construction resists corrosion in typical ventilation environments. Installers must verify shaft diameter, rotation direction and hub orientation before fitting.

Highlights

  • 16 in diameter moves more air per revolution
  • 8 degree pitch optimises airflow at 1620 RPM
  • Four aluminium blades resist corrosion and reduce weight
  • 1/2 in bore fits standard 1/4 hp direct-drive motors
  • Clockwise rotation with intake hub directs air efficiently

Specifications

BrandDayton

Questions about this item

Will the 1/2 in bore fit the motor shaft on my existing blower assembly?

The propeller has a 1/2 in (12.7 mm) bore designed for direct-drive mounting on a matching shaft.

How can I confirm the 25.8 degree pitch is moving air correctly after installation?

Verify clockwise rotation at 1620 RPM and check that airflow direction matches the intake-side hub location.

Does the package include mounting hardware or just the 16 in aluminum propeller?

The box contains the four-blade aluminum propeller only; fasteners and shaft adapters must be sourced separately.

More in Blowers

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.