We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 1 HP open drip-proof motor with C-face rigid base

Dayton

Dayton 4K811 GP Motor 1 HP 1730 rpm 145TC

SKU CH-DP83-TRN9M

Single-phase capacitor-start motor delivers 1 hp at 1730 rpm in a 145TC C-face frame for continuous duty

  • typeClosed Base
  • 1 HP output drives demanding fan loads
  • 1730 rpm nameplate speed for consistent airflow
  • Dual-voltage 115/208-230 V fits common supplies
  • 145TC C-face rigid base simplifies mounting
  • 15 service factor handles continuous duty

General Purpose Motor for Fan Accessories

The Dayton 4K811 is a single-phase capacitor-start motor rated at 1 hp and 1730 rpm. It operates on 115/208-230V AC at 60 Hz with a 145TC frame and open drip-proof enclosure. Designed for continuous duty, it suits replacement or new-build fan accessory projects.

Upgrade from Lower Output or Worn Units

This motor replaces units with less than 1 hp output or those lacking a 1.15 service factor. The jump is worth it when the application demands continuous operation at up to 40 degrees C ambient and a rigid C-face mounting base. It also supports usable 208V supply where older motors may not.

Check Voltage, Frame and Mounting Before Ordering

Verify that your supply matches 115V or 208-230V and that the 145TC frame fits the existing mounting pattern. Confirm the shaft rotation requirement suits CW/CCW reversible operation. Note the motor has no thermal protection and carries Proposition 65 warnings for cancer and reproductive harm.

Highlights

  • 1 HP output drives demanding fan loads
  • 1730 rpm nameplate speed for consistent airflow
  • Dual-voltage 115/208-230 V fits common supplies
  • 145TC C-face rigid base simplifies mounting
  • 15 service factor handles continuous duty

Specifications

BrandDAYTON
typeClosed Base

Questions about this item

What frame size and mounting style does the 145TC motor need?

The motor uses a 145TC frame with C-Face rigid base mounting and can be installed at any angle.

How do I wire the capacitor-start motor for 115 V or 208-230 V operation?

Connect the leads for 115 V at 14.8 A or 208-230 V at 7.5-7.3 A following the diagram on the nameplate; the motor runs at 1,725 rpm.

What ongoing care does the open drip-proof motor with Class B insulation require?

Keep the 40 °C max ambient clean, ensure ventilation stays clear, and monitor bearing noise since there is no thermal protection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.