We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 22 mm plastic push button with extended head

Dayton

Dayton 32UK48 Non-Illuminated Push Button Red 22 mm

SKU CH-7HMV-9VQ5R

A 22 mm red plastic push button with momentary action, 10 A at 600 V AC rating, IP65 and NEMA 1, 12, 13, 2, 3, 4, 4x protection

  • Momentary push action gives reliable operator control
  • 22 mm mounting fits standard panel cut-outs
  • 10 A at 600 V AC handles demanding circuits
  • IP65 and NEMA 1, 12, 13, 2, 3, 4, 4x resist harsh environments
  • Screw-clamp terminals simplify wiring installation

Product Identity

The Dayton 32UK48 is a non-illuminated push button designed for industrial control panels and safety circuits. It suits maintenance engineers and panel builders who need a reliable momentary operator for emergency stop or machine control functions.

Critical Specification

The contact rating is 10A at 600V AC with an A600/P600 NEMA designation and a 1NC contact form. This electrical capacity determines whether the switch can handle the specific load in your application without overheating or premature failure.

Installation Notes

The 22 mm mounting diameter fits standard panel cut-outs and the screw clamp terminals accept stripped wire without special tools. The IP65 and NEMA 1, 2, 3, 4, 4x, 12, 13 ratings protect against dust and water jets, but the plastic bezel and head require care not to over-tighten the mounting nut and crack the housing.

Highlights

  • Momentary push action gives reliable operator control
  • 22 mm mounting fits standard panel cut-outs
  • 10 A at 600 V AC handles demanding circuits
  • IP65 and NEMA 1, 12, 13, 2, 3, 4, 4x resist harsh environments
  • Screw-clamp terminals simplify wiring installation

Specifications

BrandDAYTON

Questions about this item

How much current can the 10A @ 600V AC rating handle in a real control circuit?

The contact is rated for 10 amps at 600 volts AC, matching NEMA A600/P600, so it can switch typical industrial pilot-duty loads such as contactor coils or solenoids within that limit.

What does the screw-clamp terminal connection mean for wiring?

Screw-clamp terminals accept solid or stranded wire; tighten the captive screws to secure conductors without ferrules, giving a reliable connection for panel wiring.

What panel cut-out and depth does the 22 mm operator need?

Mount in a standard 22 mm cut-out; the plastic bezel fits NEMA 1, 2, 3, 4, 4x, 12, 13 enclosures and the IP65 rating is maintained when the panel thickness suits the supplied locking nut.

More in Safety Switches & Disconnects

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.