We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 1/2 hp motor, open drip-proof enclosure, cradle base, 20.9 lb

Dayton

Dayton 30PT65 1/2hp 1725RPM 48Z Motor

SKU CH-FY7H-PC5R7

Single-phase capacitor-start motor delivers 1/2 hp at 1725 RPM with dual-voltage 115/230V operation and continuous duty rating

  • weight20.9
  • typeClosed Base
  • 1/2 hp motor delivers 1725 RPM for strong airflow
  • Dual 115/230 V voltage fits standard and industrial wiring
  • 48Z frame with cradle base simplifies mounting
  • Auto thermal protection prevents overheating during continuous duty
  • 25 service factor handles peak loads reliably

Motor Purpose and Fit

The Dayton 30PT65 is a general-purpose, single-phase capacitor-start/run motor rated at 1/2 hp and 1725 RPM. It suits equipment requiring a 48Z frame, cradle-base mounting and horizontal operation at 115/230 V AC.

Installation Notes

The open drip-proof enclosure and 20.9 lb weight allow straightforward handling, but the cradle base must be securely bolted to a level surface to prevent vibration. Wiring for dual voltage and confirming CW/CCW rotation direction before final tightening are the steps most often missed.

Deciding Specification

The 48Z frame size is the critical dimension that determines whether this motor bolts to your existing mounting pattern; verify the frame code on the nameplate of the unit being replaced.

Highlights

  • 1/2 hp motor delivers 1725 RPM for strong airflow
  • Dual 115/230 V voltage fits standard and industrial wiring
  • 48Z frame with cradle base simplifies mounting
  • Auto thermal protection prevents overheating during continuous duty
  • 25 service factor handles peak loads reliably

Specifications

BrandDAYTON
weight20.9
typeClosed Base

Questions about this item

How can I confirm the motor is running correctly after wiring it to 115V or 230V?

Verify the shaft turns smoothly at 1725 RPM with no unusual noise, and check that current draw stays near 5.0 A on 115V or 2.6 A on 230V under load.

What comes with the 30PT65 motor and what must I supply?

The motor includes a cradle base for horizontal mounting; you must provide wiring, circuit protection, and any driven equipment such as a fan blade or pulley.

Which voltage setting should I choose for my 60 Hz supply?

Use the 115V connection for a 115V circuit or the 230V connection for a 230V circuit; both operate at 60 Hz and deliver 1/2 hp at 1725 RPM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.