We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round green LED pilot light with chrome metal body and plastic Fresnel lens, 30 mm diameter

Dayton

Dayton 30G408 Pilot Light LED 24V 30mm Chrome Green

SKU CH-KHCR-0E0NP

A 30 mm chrome pilot light with green LED illumination for 24 V AC/DC circuits, rated NEMA 13 and 4 with IP65 protection

  • 24 V AC/DC operation suits low-voltage control panels
  • Green LED lamp gives clear status indication at a glance
  • 30 mm round body fits standard panel cut-outs
  • IP65 and NEMA 13, 4 ratings protect against dust and water jets
  • Chrome zinc die-cast housing resists corrosion in industrial environments

Pilot Light, 24V LED, 30mm Chrome Green

The Dayton 30G408 is a round panel-mount pilot light designed for 24V AC or DC control circuits. Its green LED lamp provides clear status indication for machinery, panels and automation equipment. The 30mm mounting diameter suits standard industrial cut-outs. It is supplied new and ready for installation.

Zinc die-cast body, NEMA 13 and IP65.

The housing uses zinc die-cast metal with a chrome finish and a plastic Fresnel lens. Pressure-plate terminals accept solid or stranded wire without soldering, speeding up wiring on the bench or in the field. NEMA 13 and 4 ratings plus IP65 protect against oil, coolant, dust and water jets in shop environments.

Full-voltage LED module, low heat.

The integrated full-voltage LED module runs directly from the 24V supply without an external resistor or transformer. LED operation keeps heat rise low and eliminates the need for lamp replacement. Power draw stays minimal, so the indicator adds negligible load to the control circuit.

Highlights

  • 24 V AC/DC operation suits low-voltage control panels
  • Green LED lamp gives clear status indication at a glance
  • 30 mm round body fits standard panel cut-outs
  • IP65 and NEMA 13, 4 ratings protect against dust and water jets
  • Chrome zinc die-cast housing resists corrosion in industrial environments

Specifications

BrandDAYTON

Questions about this item

Does the 24 V AC/DC rating limit the pilot light to a specific control-circuit voltage?

The unit is rated for 24 V AC or DC, so it operates directly on standard 24 V control circuits without an external transformer or resistor.

What panel cut-out and mounting hardware does the 30 mm chrome body require?

A 30 mm round cut-out is needed; the zinc die-cast body uses a pressure-plate terminal block and secures with the supplied mounting nut.

How is the LED module wired, and what wiring mistake causes a non-lighting install?

Strip each conductor, insert into the pressure-plate terminals and tighten the screws — reversing the wires on a DC supply will leave the light dark.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.