We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tan Hytrel jaw coupling insert spider, L075 size

Dayton

Dayton 29HZ17 jaw coupling insert L075 Hytrel tan 55D durometer

SKU CH-ATX6-VV2HP

Hytrel spider insert for L075 jaw couplings, rated 11,000 RPM and 227 in-lb torque with 55D durometer

  • Hytrel spider handles 227 in-lb peak torque
  • 55D durometer resists wear in continuous operation
  • 11,000 RPM rating suits high-speed shafts
  • 015 in parallel offset eases alignment
  • 5 degree angular capacity absorbs vibration

Dayton L075 jaw coupling insert

This Dayton 29HZ17 insert fits L075 jaw couplings and transmits torque between two shafts in light-duty power-transmission applications. The Hytrel spider handles 0.36 hp at 100 RPM and a peak torque of 227 in-lb while allowing 0.5 degrees of angular and 0.015 in of parallel misalignment.

Fits L075 hubs with 1/4 to 7/8 in bores

The tan 55D durometer spider installs between two L075 hubs and requires no lubrication. Its fail-safe design keeps the drive engaged if the elastomer wears, and the 0.02 mm axial float accommodates minor shaft end-play without binding.

Runs to 11 000 RPM with low vibration

Hytrel material dampens torsional vibration and runs quietly at rated speed. The insert operates within its 227 in-lb torque limit without generating excess heat, so no external cooling is needed in normal close-coupled service.

Highlights

  • Hytrel spider handles 227 in-lb peak torque
  • 55D durometer resists wear in continuous operation
  • 11,000 RPM rating suits high-speed shafts
  • 015 in parallel offset eases alignment
  • 5 degree angular capacity absorbs vibration

Specifications

No published specifications for this item yet.

Questions about this item

Will the 11000 RPM speed rating hold up under continuous operation?

The insert is rated for a maximum speed of 11000 RPM. Sustained operation at this limit depends on alignment, lubrication and load staying within the 227 in-lb torque and 0.5 degree angular misalignment specs.

How much heat or vibration does the Hytrel spider generate during all-day runs?

Hytrel material dampens vibration and runs cooler than many elastomers. With 0.015 in parallel misalignment and 0.02 mm axial motion allowances, heat build-up stays low when installed within the 1/4 in to 7/8 in bore range.

Which hubs must I already have for this L075 insert to fit?

You need L075-compatible jaw coupling hubs with bores between 1/4 in and 7/8 in. The spider outside diameter is 1 47/64 in and matches the L075 hub pattern for a close-coupled connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.