Dayton
Dayton 24EP05 time delay relay on delay 12V DC 10A DPDT 8-pin octal 9s-15min IP20
Provides adjustable on-delay timing from 9 seconds to 15 minutes at 12 V DC with a 10 A DPDT output in an 8-pin octal socket
- Adjustable 9 s to 15 min delay for flexible timing control
- 12 V DC coil voltage suits low-voltage control circuits
- DPDT contacts rated 10 A at 240 V AC or 30 V DC
- 8-pin octal plug-in base enables quick socket installation
- IP20 enclosed housing protects internal components from solid objects
What This Relay Does
The Dayton 24EP05 is a single-function on-delay time relay built for 12 V DC control circuits. It suits engineers and maintenance teams who need a reliable, plug-in timing element for industrial machinery, automotive test rigs or panel-building projects.
The Timing Range That Decides Fit
The adjustable potentiometer sets the delay between 9 seconds and 15 minutes, giving one continuous range for sequencing motors, lighting or safety interlocks. If your application demands a delay shorter than 9 seconds or longer than 15 minutes, this relay cannot meet the requirement.
How It Integrates Into A Panel
The 8-pin octal base plugs into a standard octal socket, so no soldering or special wiring is needed. The DPDT contacts switch up to 10 A at 240 V AC or 30 V DC, letting the relay drive contactors, solenoids or pilot devices directly while the IP20 enclosure protects the internals in a typical cabinet environment.
Highlights
- Adjustable 9 s to 15 min delay for flexible timing control
- 12 V DC coil voltage suits low-voltage control circuits
- DPDT contacts rated 10 A at 240 V AC or 30 V DC
- 8-pin octal plug-in base enables quick socket installation
- IP20 enclosed housing protects internal components from solid objects
Specifications
| Brand | DAYTON |
|---|
Questions about this item
What does the 9-second-to-15-minute on-delay range mean once the relay is installed?
The relay will wait between 9 seconds and 15 minutes after power is applied before switching its DPDT contacts, adjustable via the built-in potentiometer.
What does the octal 8-pin plug-in interface cap in practice?
The octal 8-pin base fits standard octal sockets and carries the 12 V DC coil supply plus DPDT contacts rated for 10 A at 240 V AC or 30 V DC.
What does the relay physically need to fit or mount in a panel?
It plugs into an octal socket; the enclosed body is 1.7 in deep and rated IP20, so allow socket depth plus clearance behind the panel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
