Dayton
Dayton 24EN97 Octal Off-Delay Time Relay 240V AC 10A 9s-15min 11-pin
Off-delay time relay with 9-second to 15-minute range, DPDT contacts rated 10 A at 240 V AC, 11-pin octal plug-in base
- Off-delay timing covers 9 seconds to 15 minutes
- DPDT contacts switch 10 amps at 240 volts AC
- 11-pin octal base plugs into standard sockets
- IP20 enclosure protects internal components
- Single-function design simplifies setup and operation
Off-Delay Relay for Motor Control
The Dayton 24EN97 is a single-function time-delay relay designed for 240V AC control circuits. It suits installers and maintenance teams who need a reliable off-delay action in machinery, conveyor or lighting panels.
Plug-In Octal Base with 11 Pins
The unit mounts in a standard octal socket using 11 flat pins, so it can be swapped without rewiring the panel. DPDT contacts rated at 10 A @ 240V AC or 10 A @ 30V DC handle the load directly, freeing the installer from adding a separate contactor for many small-motor or heater circuits.
Adjustable 9 s to 15 min Off Delay
A potentiometer sets the delay between 9 seconds and 15 minutes, and the enclosed IP20 housing protects the mechanism during continuous duty. The coil draws 240V AC, so the relay holds its timing through repeated start-stop cycles without drift.
Highlights
- Off-delay timing covers 9 seconds to 15 minutes
- DPDT contacts switch 10 amps at 240 volts AC
- 11-pin octal base plugs into standard sockets
- IP20 enclosure protects internal components
- Single-function design simplifies setup and operation
Specifications
| Brand | DAYTON |
|---|
Questions about this item
What is the maximum delay the 24EN97 can hold before the contacts change state?
The relay can be set up to 15 minutes off-delay before the DPDT contacts switch.
How much heat or noise does the 240 V AC coil produce when energised continuously?
The enclosed IP20 housing runs silently; only the coil’s normal warmth appears during all-day operation.
Which socket must I already have to plug in the 11-pin octal base?
An 11-pin octal socket rated for 240 V AC and 10 A is required for the plug-in mount.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
