We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton amber LED panel light 12mm 6V raised lens brass nut

Dayton

Dayton 22NY85 Raised Panel Light LED 12mm 6V Amber

SKU CH-6WW2-1BXNG

A 12 mm amber LED panel indicator rated for 6 V AC/DC with a 50 000 hour life and IP40 protection

  • Raised LED panel light for clear status indication
  • 12 mm mounting diameter fits standard panel cut-outs
  • 6 V AC/DC operation suits low-voltage control circuits
  • UL Listed for verified safety compliance
  • 50 000 hr average life reduces replacement frequency

Raised Panel Light 12mm 6V Amber

The Dayton 22NY85 is a raised indicator light built for panel mounting in machinery and control panels. It uses a 12 mm mounting diameter and runs on 6 V AC or DC, making it suitable for low-voltage industrial circuits. The amber LED provides clear status indication in a compact round housing.

Fit for 12mm panels needing 6V amber status

This light suits builders fitting a 12 mm cut-out with panel thickness between 0.028 in and 0.110 in who need a UL Listed amber signal at 6 V. It is not for panels requiring a different mounting diameter, a higher voltage rating, an IP rating above IP40, or a different lens colour.

Key spec is the 12 mm mounting diameter

The single specification that decides fit is the 12 mm mounting diameter, which must match the panel cut-out exactly. The light draws 17.5 mA, offers an average life of 50,000 hr, connects via M 2.5 screw terminals, and carries an IP40 rating for basic dust protection.

Highlights

  • Raised LED panel light for clear status indication
  • 12 mm mounting diameter fits standard panel cut-outs
  • 6 V AC/DC operation suits low-voltage control circuits
  • UL Listed for verified safety compliance
  • 50 000 hr average life reduces replacement frequency

Specifications

BrandDAYTON

Questions about this item

What panel thickness range does the 12mm mounting hole accept for this 6V amber LED?

The 12mm mounting hole fits panels from 0.028 in to 0.110 in thick, matching the spec for the raised nylon body and brass nut.

Will the M2.5 screw terminals on this 17.5 mA indicator work with my existing 6V DC control board?

Yes, the M2.5 screw connections accept 6V AC or DC, so a 6V DC board can drive the amber LED directly at its rated 17.5 mA draw.

How can I confirm the IP40-rated 12mm light is operating correctly after wiring it to 6V?

Apply 6V AC or DC; the amber LED should illuminate steadily at 17.5 mA, and the UL Listed marking on the brass nut verifies the build.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.