We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact zinc-alloy submersible pump with screened intake and 6 ft cord

Dayton

Dayton 12U598 1/10 HP Submersible Pump 115V

SKU CH-AXNR-B02VD MPN 12U598

A compact submersible pump delivers up to 950 gph at 1 ft head and 24.7 ft maximum head

  • TypeDrain Components
  • 1/10 HP motor delivers 950 gph at 1 ft head
  • 115 V AC power draws 5.2 A for standard outlet use
  • 7 ft maximum head handles deep drainage tasks
  • Oil-filled motor sealing protects internals for continuous duty
  • Screened intake with 3/4 in NPT discharge fits common pipe sizes

Submersible drain pump for residential use

The Dayton 12U598 is a compact submersible pump designed to remove water from sump pits, basements or utility sinks. Its zinc-alloy housing and oil-filled motor provide corrosion resistance for continuous operation in clean or oily water. A 6 ft power cord connects to a standard 115 V outlet.

Suited for low-head drainage, not high-lift jobs

This unit suits homeowners and plumbers needing up to 950 gph at 1 ft of head for typical dewatering tasks. Buyers who need more than 24.7 ft of maximum head or higher flow at elevation should look at larger-capacity models.

1/10 hp motor delivers 950 gph at 1 ft head

The 1/10 horsepower motor draws 5.2 A and produces a maximum flow of 950 gph at 1 ft of head, falling to 758 gph at 10 ft. This single rating determines whether the pump can handle the required lift and volume.

Highlights

  • 1/10 HP motor delivers 950 gph at 1 ft head
  • 115 V AC power draws 5.2 A for standard outlet use
  • 7 ft maximum head handles deep drainage tasks
  • Oil-filled motor sealing protects internals for continuous duty
  • Screened intake with 3/4 in NPT discharge fits common pipe sizes

Specifications

TypeDrain Components
BrandDayton
Model12U598

Questions about this item

What size discharge pipe does the 12U598 need for installation?

The pump connects to a 3/4 in NPT discharge fitting so you must provide matching 3/4 in pipe or hose and a suitable adapter.

Will the 1/10 hp motor on the 12U598 run continuously on a standard 115 V circuit?

Yes, the motor draws 5.2 A at 115 V AC and is rated for continuous duty on a properly protected household circuit.

How can I confirm the 12U598 is delivering rated flow after setup?

Measure the output at the discharge; at 1 ft of head you should see about 950 gph, at 5 ft about 855 gph, and at 10 ft about 758 gph.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.