We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jet black sleeved cable with SATA plug splitting to three 4-pin fan connectors

Darkside

Darkside Three-Way Fan Splitter Cable SATA Power 40cm DS-0931

SKU CH-YXNT-F4BF0

Connects three PWM or 3-pin fans to a single SATA power source with 40 cm jet-black sleeved cables

  • Cable Length1.3 ft.
  • Connect three fans from one SATA port
  • Powers 12 V to all three fans simultaneously
  • 40 cm length fits compact builds
  • Jet-black sleeving protects wires and looks clean
  • Accepts both 4-pin PWM and 3-pin fan connectors

Three-Way Fan Splitter with SATA Power

This 40 cm cable splits a single SATA power connector into three 4-pin PWM fan headers. It supplies 12 V to all connected fans at once. The black-sleeved wiring keeps the loom tidy inside the case. 3-pin fans also fit the 4-pin housings.

Builders Adding Multiple Case Fans

Ideal for anyone running several chassis fans from one SATA lead on the power supply. It removes the need for motherboard fan headers when only power is required. Not suited for setups that need per-fan speed reporting or motherboard-controlled PWM curves.

SATA-Powered Triple Header

The SATA plug draws power directly from the PSU, bypassing motherboard current limits. Three fans spin up together from one cable, reducing clutter. No software or extra adapters are included.

Highlights

  • Connect three fans from one SATA port
  • Powers 12 V to all three fans simultaneously
  • 40 cm length fits compact builds
  • Jet-black sleeving protects wires and looks clean
  • Accepts both 4-pin PWM and 3-pin fan connectors

Specifications

Cable Length1.3 ft.

Questions about this item

What power connector must my PSU provide to run this 40 cm splitter?

Your power supply needs a free SATA power connector to feed the 12 V line that drives all three fan headers.

Can I plug my older 3-pin fans into the 4-pin headers on this cable?

Yes, the 4-pin housings accept 3-pin fan plugs directly; the fans will run at full 12 V speed without PWM control.

How can I verify the splitter is delivering power to all three fans after installation?

Power on the system and confirm each connected fan spins up; all three should start together from the single SATA source.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.