We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Darkside DS-0842 gun metal cable sleeving 1ft length

Darkside

Darkside DS-0842 6mm (1/4") High Density Cable Sleeving Gun Metal 1ft

SKU CH-DGW8-SFS9V

Gun Metal high-density sleeving with a 6 mm diameter and ultra-tight weave tidies power wires into a clean, custom look

  • FeaturesTired of your cable set's messy black, red and yellow wires

Color Gun Metal

  • Neat cable look with high-density Gun Metal sleeve
  • 6mm diameter expands to ~11mm for multiple wires
  • Ultra-tight weave hides messy coloured wires
  • Custom-cut 1ft length sold by the foot
  • Designed for PSU power cable modding

Cable sleeving for tidy wiring

Darkside DS-0842 is a high-density gun-metal sleeve sold in one-foot lengths. The 6 mm bore expands to roughly 11 mm so it fits over typical power-supply leads. It turns a tangle of coloured wires into a clean, uniform loom. Builders who want a single continuous run longer than one foot need multiple pieces.

Practical limits of sleeving

The tight weave resists fraying but adds bulk, so tight routing channels may become crowded. Stretch is limited to the stated maximum diameter; cables thicker than 11 mm will not pass through. Sharp bends can kink the sleeve and expose the wires underneath. Installers who need fire-rated or UV-resistant material should look elsewhere.

6 mm bore decides fit

The 6 mm (0.24") nominal diameter is the single spec that determines whether your cables will slide in. Measure each wire bundle before ordering; anything above 11 mm will not fit. The gun-metal finish is purely cosmetic and does not affect electrical performance. Buyers who need a different colour or a larger bore must choose another product.

Highlights

  • Neat cable look with high-density Gun Metal sleeve
  • 6mm diameter expands to ~11mm for multiple wires
  • Ultra-tight weave hides messy coloured wires
  • Custom-cut 1ft length sold by the foot
  • Designed for PSU power cable modding

Specifications

BrandDarkside
ModelDS-0842
FeaturesTired of your cable set's messy black, red and yellow wires hanging out all the time? Cable sleeving can make a messy tangled knot of wires into a neat, aesthetically pleasing cable set.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I use the 6mm sleeving for SATA cables or only for thicker PSU wires?

The 6mm diameter expands to roughly 11mm so it fits a few power wires such as PSU leads; standard SATA cables are usually narrower and would be loose inside this sleeve.

What does the 0.24 inch figure tell me once the sleeve is on my cables?

That is the nominal 6mm inner diameter; the high-density weave stretches to about 11mm, letting you bundle several PSU conductors into a single tidy run.

Does this sleeving meet any SATA or eSATA specification for signal quality?

No — it is a cosmetic braided cover only and carries no electrical conductors, so it does not affect SATA or eSATA signal performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.