We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jet black 8-pin PCIe power extension cable with single braid sleeve, 12 inch length

Darkside Computer Modding

Darkside Computer Modding 8-Pin PCI-E 12" 30cm HSL Single Braid Extension Cable Jet Black

SKU CH-36QM-E6ZRH

An 8-pin PCI-E extension cable measuring 12 inches with single braid sleeving in jet black

  • Cable Length1 ft.

Color Black

Struck-through versions exist but are not stocked here.

  • Clean cable routing with 12 inch PCI-E extension
  • Jet black single braid matches dark themed builds
  • 30 centimetre length reaches GPU without slack
  • 8 pin connector supports standard graphics cards
  • Designed in Canada for modding quality

Cable extension for 8-pin PCI-E power

This Darkside Computer Modding extension adds 30 cm to an existing 8-pin PCI-E cable, letting you route power cleanly around large graphics cards or custom loops. It is built for modders who want a uniform Jet Black finish across every visible wire. The single braid sleeve keeps the bundle tidy without adding bulk.

Replaces the stock PSU lead that is too short

Use it when the factory cable cannot reach your GPU after a case change or a vertical mount, or when you want to hide the original wiring entirely. The jump is worth it if cable management is the last thing stopping a clean side-panel view.

Connects between your PSU cable

It needs a standard 8-pin PCI-E source and a matching 8-pin device header; no adapters are included. The extension frees up routing space behind the motherboard tray and lets you plan bends before the final build. Builders who need a 6+2-pin split or a 24-pin ATX extension should look at the other cables in the same range.

Highlights

  • Clean cable routing with 12 inch PCI-E extension
  • Jet black single braid matches dark themed builds
  • 30 centimetre length reaches GPU without slack
  • 8 pin connector supports standard graphics cards
  • Designed in Canada for modding quality

Specifications

Cable Length1 ft.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 12-inch length of this 8-pin PCI-E extension reach from my PSU to a top-mounted GPU?

The cable measures 30 cm, or roughly 12 inches, so it adds that much reach to your existing PSU lead; measure your case routing to confirm it covers the gap.

How do I connect the HSL single-braid extension without melting the pins, and what step do builders skip?

Push the extension firmly onto the PSU's 8-pin PCI-E plug until the latch clicks, then route the braid without sharp bends; the step most missed is fully seating both the PSU side and the GPU side before powering on.

When should I replace the Jet Black braided sleeve on this DS-0179 cable?

Inspect the sleeve annually; replace the cable if the braid frays, discolours, or if any connector pins show corrosion or heat damage.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.