We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White SATA 3.0 data cable, 60 cm, 180° to 90° connectors with latch

Darkside Computer Modding

Darkside Computer Modding 60cm SATA 3.0 180° to 90° Data Cable with Latch White

SKU CH-41ST-4NVVB

A 60 cm SATA 3.0 cable with a 180° to 90° latch connector for tight drive bays

  • Length2 ft.
  • Cable Length1.97 ft.

Color White

  • SATA 3.0 speed for fast data transfers
  • 60 cm length fits mid-tower cable routes
  • 180° to 90° connectors ease tight bends
  • Latch secures connection against vibration
  • White sleeving adds clean modding look

White SATA cable for modded builds

This 60 cm SATA 3.0 data cable connects a storage drive to a motherboard or controller. A straight 180 degree plug meets a right-angle 90 degree plug so routing stays tidy behind a drive cage. The white sleeving matches light-themed interiors and the latch secures the connection against vibration. It suits builders who want a clean look without custom sleeving work.

Replaces short or stiff factory cables

Factory leads are often too short for bottom-mounted drive bays or run across airflow paths. This 24 inch length reaches across mid-tower and full-tower layouts while the right-angle end hugs the drive PCB. The upgrade is worth it when cable clutter blocks intake fans or when a colour-matched cable completes a themed build. Builders needing internal USB or fan extensions will not find them here.

Sustained signal integrity over sleeved length

The SATA 3.0 specification supports 6 Gb/s throughput and the cable maintains that rate across its full 1.97 foot run. Shielding beneath the sleeve resists EMI from nearby power cables during long copy sessions or RAID rebuilds. The latch prevents intermittent disconnects when the case is moved or drives spin up. No active electronics means no thermal throttling or driver dependence.

Highlights

  • SATA 3.0 speed for fast data transfers
  • 60 cm length fits mid-tower cable routes
  • 180° to 90° connectors ease tight bends
  • Latch secures connection against vibration
  • White sleeving adds clean modding look

Specifications

Length2 ft.
Cable Length1.97 ft.

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What clearance does the 90° connector need behind a drive?

The 90° plug bends the cable toward the drive body, so allow roughly the cable diameter plus the connector height behind the SATA port; the 60 cm length gives enough slack to route without sharp bends.

How do I seat the latch on the 180° end without bending the pins?

Align the straight 180° connector squarely with the motherboard port, push straight in until the metal latch clicks, then tug gently to confirm it is locked.

When should I replace the cable if the sleeving frays?

Replace it once the woven sleeve shows exposed wires or the latch no longer holds firmly; the SATA 3.0 rating stays valid only while the conductors and latch remain intact.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.