We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Graphite metallic sleeved SATA cable with 180° to 90° connectors

Darkside Computer Modding

Darkside Computer Modding 60cm SATA 3.0 180° to 90° Cable Graphite Metallic DS-0577

SKU CH-TBNN-33CR3

A 60 cm SATA 3.0 data cable with a 180° to 90° latch connector in graphite metallic sleeving

  • Length2 ft.
  • Cable Length1.97 ft.
  • 60 cm length fits mid-tower builds cleanly
  • 180° to 90° connectors ease tight routing
  • SATA 3.0 spec supports 6 Gb/s throughput
  • Graphite metallic sleeve adds modding style
  • Latch design secures connection against vibration

60 cm SATA 3.0 Data Cable

This 60 cm SATA 3.0 cable connects a storage drive to a motherboard or controller using a straight 180° plug on one end and a right-angle 90° plug on the other. The graphite metallic sleeving is aimed at modders who want a clean, colour-coordinated interior. Both connectors feature a latch to prevent accidental disconnection during transport or vibration. It suits builders who value visual consistency as much as function.

Sustained Signal Integrity

The cable meets the SATA 3.0 specification, so it maintains the full 6 Gbit/s transfer rate across its 60 cm length without the signal degradation that can appear on longer, unsleeved runs. The tight braided sleeve reduces electromagnetic interference from neighbouring power cables, helping the link stay at maximum speed during extended read or write sessions. It is not designed for external eSATA ports or for runs that exceed the standard one-metre limit.

Build Quality and Daily Use

A dense graphite metallic braid covers the conductors, resisting abrasion and kinking when routed behind motherboard trays or through tight grommets. The 180° connector inserts vertically, while the 90° end hugs the PCB edge, easing cable management in compact cases. Latches on both ends click firmly, so drives stay seated even when the system is moved. Buyers who need a straight-through 180° to 180° cable or a different length should look elsewhere.

Highlights

  • 60 cm length fits mid-tower builds cleanly
  • 180° to 90° connectors ease tight routing
  • SATA 3.0 spec supports 6 Gb/s throughput
  • Graphite metallic sleeve adds modding style
  • Latch design secures connection against vibration

Specifications

Length2 ft.
Cable Length1.97 ft.

Questions about this item

Does the 60 cm SATA 3.0 cable generate any noticeable heat or power draw when running all day?

No, a passive SATA 3.0 data cable carries only signal traffic and draws negligible power, so it adds no measurable heat to a system running continuously.

What existing drive and motherboard connectors are required for this 180° to 90° cable to work?

You need a standard SATA 3.0 port on the motherboard or controller and a matching SATA 3.0 data port on the SSD or HDD; the cable simply bridges the straight and right-angle ends.

Will the 1.97 ft graphite metallic sleeved cable fit cleanly alongside older SATA 2.0 drives in a tight case?

Yes, the cable is fully backward compatible with SATA 2.0 devices, and the 90° connector helps route the sleeved 60 cm length neatly in crowded drive bays.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.