We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jet black sleeved SATA cable with straight connectors on both ends

Darkside Computer Modding

Darkside Computer Modding 60cm SATA 3.0 180° to 180° Data Cable Jet Black

SKU CH-1TQV-033XW

A 60 cm SATA 3.0 cable with straight 180° connectors on both ends for internal drive connections

  • Length2 ft.
  • Cable Length1.97 ft.

Color Black

  • SATA 3.0 interface supports up to 6 Gbps transfer speeds
  • 60 cm length reaches drives in mid-tower and full-tower cases
  • Straight 180° connectors on both ends suit standard motherboard and drive ports
  • Latching mechanism locks the plug in place to prevent accidental disconnection
  • Jet-black sleeved jacket gives a clean look for modded builds

Jet Black SATA 3.0 Data Cable

This 60 cm SATA 3.0 cable carries a jet black sleeve for clean cable management inside modded builds. Straight 180 degree connectors on both ends suit standard drive and motherboard ports. The 1.97 ft length reaches mid tower drive bays without excess slack. Builders who need right angle connectors or longer runs should choose a different variant.

Latch Connector Install Notes

Each end features a latch that clicks into the port for a secure fit. Route the sleeved cable behind the motherboard tray to avoid kinks near the connector hoods. The stiff sleeve resists sharp bends so allow a gentle radius at each end. Forcing the latch past a misaligned port can damage the plastic tab.

Sustained Transfer Behaviour

The SATA 3.0 interface supports up to 6 Gbps throughput for SSD and HDD workloads. Shielded conductors maintain signal integrity during extended sequential reads or writes. The sleeve does not trap heat so cable temperature stays near ambient during long copy jobs. No active cooling or special drivers are required.

Highlights

  • SATA 3.0 interface supports up to 6 Gbps transfer speeds
  • 60 cm length reaches drives in mid-tower and full-tower cases
  • Straight 180° connectors on both ends suit standard motherboard and drive ports
  • Latching mechanism locks the plug in place to prevent accidental disconnection
  • Jet-black sleeved jacket gives a clean look for modded builds

Specifications

Length2 ft.
Cable Length1.97 ft.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the SATA 3.0 180° cable is working after connecting it?

The system should detect the attached drive at SATA 3.0 speeds without errors; verify in BIOS or OS disk management that the device appears and transfers data normally.

What is included with the DS-0163 cable and what must I buy separately?

The package contains the 60 cm sleeved SATA data cable with latching 180° connectors on both ends; no drive, power cable or adapter is included.

Which length and connector style should I choose for my build?

This model is 60 cm (24 inches) with straight 180° plugs; other versions offer 12 to 18 inch lengths and 90° angled connectors for tighter routing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.