We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Graphite metallic SATA cable with 180 to 90 degree connectors, 45cm length

Darkside Computer Modding

Darkside Computer Modding 45cm SATA 3.0 180° to 90° Cable Graphite Metallic DS-0576

SKU CH-05MX-XJ469

A 45 cm SATA 3.0 data cable with a straight-to-right-angle connector and graphite metallic sleeving

  • Length1.5 ft.
  • Cable Length1.48 ft.
  • SATA 3.0 interface supports up to 6 Gb/s data transfer rates
  • 45 cm length fits compact builds without excess cable clutter
  • 180° to 90° connector angle eases routing behind tight drive bays
  • Graphite metallic sleeving adds a clean, coordinated look inside the case
  • Latching connectors secure the link against vibration and accidental disconnects

SATA 3.0 Data Cable 45cm

This SATA 3.0 data cable measures 45cm and connects a straight 180° connector to a right-angle 90° plug. It carries a locking latch on each end for a secure fit. The graphite metallic sleeving is designed for visual impact in custom builds. The cable is sold new and ready for installation.

Straight to Right-Angle Routing

The 180° end plugs directly into a motherboard or controller port while the 90° end tucks against a drive, reducing bend radius in tight drive bays. At 1.5 ft the length covers standard ATX board-to-cage runs without excess slack. Sleeving protects the conductors from abrasion during routing. No additional adapters are required for a standard SATA link.

Sustained Signal Integrity

The latch mechanism maintains pin contact during vibration or thermal cycling inside a running chassis. SATA 3.0 signalling operates at the rated 3.0 speed across the full 1.48 ft span without signal degradation. The fixed connector orientation prevents accidental unseating under sustained load. Builders needing longer runs or angled ends on both sides should select a different cable from the range.

Highlights

  • SATA 3.0 interface supports up to 6 Gb/s data transfer rates
  • 45 cm length fits compact builds without excess cable clutter
  • 180° to 90° connector angle eases routing behind tight drive bays
  • Graphite metallic sleeving adds a clean, coordinated look inside the case
  • Latching connectors secure the link against vibration and accidental disconnects

Specifications

Length1.5 ft.
Cable Length1.48 ft.

Questions about this item

Will the 45 cm SATA 3.0 cable reach drives in a full-tower case?

The 45 cm (1.48 ft) length suits most mid-tower builds; measure your drive-to-motherboard distance before buying.

Does the graphite metallic sleeving trap heat during continuous transfers?

The sleeving is cosmetic; it does not change the cable’s thermal behaviour under sustained SATA 3.0 traffic.

Must my motherboard have a straight SATA port for the 180° connector?

Yes — the 180° end plugs into a standard straight SATA header, while the 90° end angles toward the drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.